Optimization of Power Plant for Telecom Sector Based on Embedded System
Journal Title: Mehran University Research Journal of Engineering and Technology - Year 2019, Vol 38, Issue 1
Abstract
Modern Telecom Sector is eventually facing exceptionally tough challenges because of continuous and unexpected increase in power density requirement for the communicating machinery and equipment. To fulfil the power requirements for the equipment, a significant architecture and an optimal technique must be introduced. In this paper, a microcontroller-based optimization use of power-density has been carried out. Meeting above requirements, various equipment and electronic devices are employed. We have designed a microcontroller-based system via PROTEUS Virtual System Modeling to acquire efficient and effective results. The main focus of our work is to supply the power to Telecom equipment in meantime. The power is feeding on batteries and DG (Diesel Generator) set, depending on the condition of the power requirements. The changeover operations are performed by different relays, which are dully programmed via a microcontroller in Keil software. The power capacity of Telecom ((Telecommunication) equipment is ranged from 39-48 Volts DC. The rectification process is done by switch mode rectifiers instead of linear rectifiers. Because the switch-mode rectifier technology has brought fabulous improvements in power density as compared to linear rectifiers. This is done via simulation of the smart switch in PROTEUS software. The outcomes of the proposed system are costeffective in terms of fuel consumption of DG.
Authors and Affiliations
S. Karim, H. H. Memon, K. Hussain, B. S. Chowdhry
Keywords
Related Articles
- EP ID EP445194
- DOI 10.22581/muet1982.1901.17
- Views 111
- Downloads 0
Energy and Exergy Analysis of 210 MW Jamshoro Thermal Power Plant
In this paper, thermodynamic analysis of 210 MW dual-fire, subcritical, reheat steam power plant, situated near Jamshoro, Pakistan has been performed. Firstly, the plant is modeled by EES (Engineering Equation Solver) so...
Assessing the Removal of Turbidity and Coliform Transport through Canal-Bed Sediment at Lab-Scale: Column Experiments
This study was conducted at lab scale to determine the performance of the canal-bed for the removal of turbidity and microorganisms TC (Total Coliforms) from surface water. The canal-bed sediments were collected and anal...
A Comparative Analysis of Linear and Nonlinear Semi-Active Suspension System
The ride quality including comfort and safety is the primary factor that is targeted in the design of an effective suspension system. The parametric behavior of suspension system is non-linear but for simplicity most of...
Architecture of WiFi Based Broadcast Network for Rural Community
Digital divide is a reality in developing nations. Most of the technological advancements are available only in urban areas and rural community is still deprived of communication technology even in 21 st century. To ensu...
Modeling and Correlating Rut Depth Observed in Different Asphalt Mixture Performance Tests
The purpose of research is to model and correlate the laboratory rutting behavior of indigenous asphalt mixtures, prior to placing in the field. Extensive laboratory testing was carried out on thirty representative weari...