Oxidizing Influence over Surface Structures and Properties for A3k Steel Nitrocarburized in Fluidized Bed
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
Surface duplex thermochemical treatment (oxinitrocarburizing) has principal scope to obtaining superficial mechanical higher properties with increasing corrosion capacity. The paper is based by oxinitrocarburizing experiments made in laboratory conditions over steel samples (low carbon steels, A3k). Active media for treatments was obtaining by ammonia, methane and air. Effective treatment was made in endothermic atmosphere, methane and ammonia that produced smooth fluidization. In a second stage o postoxidation at different time was made. The results of duplex surface treatments were investigated by superficial hardness (HV5) and by metallographic structure.
Authors and Affiliations
Nelu CAZACU, Sorin DOBROVICI, Adolf BÂCLEA, Victor TĂNĂSESCU
Keywords
Related Articles
- EP ID EP663126
- DOI -
- Views 56
- Downloads 0
The Unusual Electromagnetic Proprieties of Fabric Reinforced Epoxy Composites
In this research, the electromagnetic behavior of four composite materials was investigated as an important issue of composite researchers is to control the electrical properties of polymer matrix composites. The four ma...
Two-way Shape Memory Effect in a Cu-13wt. %Al-4 wt.%Ni Shape Memory Alloy by the Thermo - Mechanical Cycling Method
A Cu - 13 % wt Al 4% wt Ni polycrystalline shape memory alloy has studied with a thermo mechanical cycling method. The two – way shape memory effect (TWSME) was obtained bending the alloy around a cylinder mold and by us...
Design and Flow Modelling of Ballast Tank In-Line Ejector
The purpose of this paper is to present the stages of designing a water in-line ejector used for ballast tanks stripping operation. The design operation was performed using NX Siemens CAD and ANSYS 15 for computer fluid...
Influence of the Chemical Composition on the Behavior of Austenitic Stainless Steel in Fluid Layer Nitriding Process
The main factors that influence the stainless steel behavior to the nitriding process are: chemical composition, nitriding temperature, treatment time. Researches have revealed that, with low temperature nitriding, the c...
Behavior of Ni/Al2O3 Nanocomposite Thin Layers in Corroding Environment
This paper investigates the effects of adding alumina nanoparticles in the electrolyte bath on surface topomorphologies and structure of electrodeposited nickel. The influence on the corrosion process in NaCl solutions h...