PECULIARITY OF PROJECT AND CALCULATIОN OF SYMMETRIC SWITCHES FOR RAILWAY AND INDUSTRIAL TRANSPORT
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 169, Issue 3
Abstract
Equilateral switch is switch with all elements are arranged symmetrically relative to the axis of the main path. Equilateral switches are widely used in marshalling-yard bays stations, because they work in cramped conditions. Equilateral switch sometimes used when it is necessary to achieve higher speeds on both side of the track. For example, the symmetric transfer switch type R65 frog number 1/11 of the speed limit in the lateral direction 1,75 times greater than for an ordinary switch of the same brand and type. Equilateral switch or applied straight, or with curved blades. Straight tongue to main station track of industrial transport. On the main paths in symmetric switches used curved tongues. In educational and reference literature very briefly presents data on the methodological calculations and design features of symmetric switches for different operational conditions, including for the mainline and industrial transport. This article summarizes some of the developments to remedy this drawback of textbooks.
Authors and Affiliations
Olena Oliinyk
Keywords
Related Articles
- EP ID EP306862
- DOI -
- Views 45
- Downloads 0
RESEARCHING OF THE CONFORMANCE RATING FOR LOCOMOTIVE REPAIR PRODUCTION
The determination of the conformance rating of locomotive repair production is associated with the formalization of expert statements obtained during its survey. In the article the structure of the compliance indicator o...
CALCULATION OF STRESS-STRAIN STATE OF CABLE SPACE FRAMES
The article presents the calculation of stress-strain state of the cable space frame that consists of space modular elements and flexible rods of the lower belt, which are connected with bolts. The cable space frame is d...
STUDY OF INTERACTION OF CLAY-CONTAINED MATERIALS BY INFRAREDSPECTROSCOPY METHOD
In the article a possibility of composition material creation is shown that contains clay soils and waste of produce. As the waste were used metallurgical slags and active sludge of biological treatment stations of urban...
FORMATION OF THE METHOD FOR SELECTION OF VEHICLES LOAD CAPACITY TO WORK WITH SCHEMES OF CONVEYING UNITIZED CARGO
The article is devoted to the research of the method for selection of vehicles load capacity to work with schemes of conveying unitized cargo. The first stage was to carry out simulation of conveying unitized cargo at di...
ESTIMATION OF RELIABILITY OF PROTIOUGINNIH SYSTEMS OF SUBRAIL BASIS WITH THE USE OF MATHEMATICAL DESIGN
In work the questions of remontoprigodnosti are examined, longevity and safety of work of constructions at the calculation modes of exploitation, to provide their normal functioning. For terms, that are examined, reliabi...