Pemilihan Bahan Sudu untuk Perancangan dan Pembuatan Prototipe Turbin Angin Sumbu Horizontal
Journal Title: Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) - Year 2018, Vol 5, Issue 2
Abstract
Electrical power is a a vital requirement for economic development and social development. Beyond the importance of the function of electrical energy for the community, it is very unfortunate that not all areas in Indonesia that are irrigated plants. The breakdown of power supplies is not separated from the problem of insufficient power generation of electricity. Overcome this problem it is necessary to glance alternative electric energy generation business-friendly environment, available all day long and easily in installation. Wind energy power plants may be a solution. Degan wind speeds in the range 5 m / s in Indonesia need to designed a wind turbine to rotating and generate energy even for a rotating with a low speed. The selected wind turbine is the horizontal axis wind turbine blades having a shapes similar to a propeller - blades aircraft in general. Material planned for the horizontal axis wind the turbine was originally wood that is readily available material and easy to shape. This wooden blade length of about 0.75 m, but after completed and assembled the turbine was not rotate even though the wind speed has reached 4 m / s, this is certainly not fit for purpose of the study. The next material is arkrilik, this type has advantages compared to wood material that is lightweight, thin and of sufficient strength. Expected to advantages, this wind the turbine will be able to work as expected
Authors and Affiliations
Muhammad Yonggi Puriza, Melda Latief
Keywords
Related Articles
- EP ID EP550439
- DOI 10.33019/ecotipe.v5i2.664
- Views 36
- Downloads 0
Desain Simulasi Sistem Pengaturan Kecepatan Motor Induksi Tiga Fasa dengan Switching Space Vector Pulse Width Modulation
Induction motor has been used by industry as a source of mechanical energy. Induction motors are very reliable, inexpensive, and easy to maintain. Induction motor is difficult to control because one of the nonlinear plan...
Desain Pengendali PID – Gain Schedulling Untuk Pengendalian Posisi pada Sistem Magnetic Levitation Ball
This study propose a design of PID controller with gain schedulling optimization to controlling position for Magnetic Levitation Ball (Maglev) system. Design of PID controller with gain schedulling optimization are used...
Analisa Kinerja PAPR pada Sistem OWDM Menggunakan Wavelet Packet
In wireless communications, demand to provide high-speed data services with good performance raises new techniques to increase spectrum efficiency and improved signal quality due to frequency selective fading. OFDM is a...
Rancang Bangun Unipolar PWM untuk Pengendalian Rangkaian H-Bridge Menggunakan Operational Amplifier
Unipolar PWM control technique carried out by comparing triangular wave with two control voltages. The resulting pulses are used to control H-Bridge circuit. The technique can be done by using the functions of the operat...
Rancang Bangun Unipolar PWM Dilengkapi dengan Pengaturan Frekuensi Menggunakan Operational Amplifier
Pulse Width Modulation (PWM) is applied to power electronic circuits for the control of converter circuits. In order to obtain good performance, the frequency of the PWM pulse must be adjusted to the type and parameter o...