Peningkatan Efektivitas Mesin Power Press 60 T dengan Menggunakan Analisa Reliability Centered Maintenance
Journal Title: Jurnal Sistem dan Manajemen Industri - Year 2017, Vol 1, Issue 2
Abstract
Corrective action on the engine damage is a temporary emergency measure, so further action is required by conducting maintenance activities, prevention of damage (Preventive maintenance), and able to detect abnormal symptoms before the machine breakdown occurs. The sudden impact of machine damage resulted in disruption of planned production performance so that it is necessary to identify and analyze the factors that cause the machine damage. Establish maintenance method using Autonomous Maintenance, Preventive Maintenance and Reliability Centered Maintenance (RCM) concept to prevent machine failure from the beginning, through fault tree analysis (FTA) method, failure mode effect, and analysis (FMEA), mean time between failure (MTBF ) is an analytical activity for implementing RCM systems on machines and critical components, able to identify and detect symptoms of malfunction before the machine is damaged. The results of the research get better application of maintenance system so that identification of important components can be anticipated from the symptoms of damage. Overall, there is an increase in performance seen from the increase of Overall Equipment Effectiveness (OEE) value, still expected to continue to increase according to JIPM 85% standard value. In conclusion FMEA, FTA, MTBF analysis method can be used to build autonomous maintenance, preventive maintenance and reliability centered maintenance so as to facilitate the production and maintenance in determining the proper maintenance of the machine.
Authors and Affiliations
Adi Rusdi Widya
Keywords
Related Articles
- EP ID EP255326
- DOI -
- Views 104
- Downloads 0
Perancangan Troli Ergonomi pada Aktivitas Pengangkutan Beras di Penggilingan Padi
Ergonomics in rice milling does not use often. In Kedungdowo village, Kaliwungi Subdistrict, Kudus Regency, the working position of the rice hull machine to the scales did not take into account the ergonomic aspects beca...
Analisis Kualitas Pelayanan Publik dengan Metode Fuzzy-Service Quality (F-Servqual) dan Index Potential Gain Customer Value (IPGCV)
This study aims to analyze the level of service quality and prioritize improvements. The method that used in this study is service quality (SERVQUAL) combined with fuzzy concepts to find out the gap between expectations...
Perancangan Mesin Bending untuk Menurunkan Reject Mechanical Packing Kapasitor
In order to increase productivity required synergizing and balancing all components in the work system. The achievement of labor productivity through activity sustainable done at one manufacturing companies who produce c...
Penentuan Kondisi Lingkungan Kerja Fisik yang Optimal Menggunakan Metode Permukaan Respon
Many consequences caused by the condition of the work environment is not good. This can be caused by noise, lighting and temperature conditions. We need to determine the optimal value of these work environment factors in...
Uji Kuat Tekan dan Daya Serap pada Batako dengan Menggunakan Metode Taguchi
The brick making process has two very critical characteristics / Critical To Quality (CTQ) , namely compressive strength and water absorption. For the quality characteristics of the compressive strength the greater the v...