PERFORMANCE OF PRESSURE DIVIDER VALVES IN HYDRAM PUMPS WITH VARIATION OF DIVIDER TUBE LENGTH
Journal Title: Engineering and Technology Journal - Year 8, Vol 8, Issue 10
Abstract
Air is the source of life for humans, plants and animals. One of the efforts to meet water needs is to use a hydram pump. A hydram pump is a pump that works without requiring external power to activate it, but this work is done by utilizing power from a water source. This study aims to determine the effect of using a pressure divider valve on the discharge of waste water and the discharge of water released by the hydram pump. This study used a hydram pump with the specifications of an air tube with a height of 60 cm and a diameter of 3 inches. The height of the waterfall from the pump body is 2 meters and the output height is 4 meters. The height of the air tube on the pressure divider is 20, 25, 30, 35, 40, 45 and 50 cm. The method used in this research is the experimental method. Quantitative data is made in tabular form and displayed graphically. The results showed that the highest wastewater discharge was 0.238 lt/s when using a tube length of 20 cm at an installation height of 2 meters from the pump body and the highest wastewater discharge was 0.232 lt/s when using a tube length of 50 cm. The highest water discharge that can be pumped is 0.0477 lt/s when a tube length of 20 cm is used. While the lowest water discharge pumped was 0.0398 lt/s occurred when using a tube length of 50 cm
Authors and Affiliations
Rudy Sutanto Sujita .
Keywords
Related Articles
- EP ID EP721842
- DOI 10.47191/etj/v8i8.17
- Views 57
- Downloads 0
HOSTEL MANAGEMENT SYSTEM USING IMAGE RECOGNITION
Hostel management system is an advanced system that makes organizing the affairs of the hostel quicker, simpler, and more efficient. The normal procedure of allocating hostels at Babcock University involves selecting the...
Root Cause Analysis Implementation to Improve Tissue Mill Automation System Availability in a Mill of the Biggest Indonesia Pulp Paper Industry: A Systematic Literature Review Approach
Increasing rivalry enforces Indonesia pulp paper industry to focus on competitive products in the market and the choice is to develop a Tissue Mill which is equipped with an automation system that has less manpower but r...
RELIABILITY ANALYSIS OF 20 KV MEDIUM VOLTAGE AIR LINE DISTRIBUTION SYSTEM AT SEMANGGA SWITCH SUBSTATION IN MERAUKE REGENCY
The breakdown of electrical energy can be caused by the unwanted failures that occur in the electric power system, especially in the distribution system, and have an impact on service continuity which can be a permanent...
KINETICS LEACHING STUDY OF URANIUM FROM ALGERIAN PHOSPHATE BY SULFURIC ACID
The kinetics of dissolution of an Algerian phosphate in sulfuric acid has been investigated in the presence of hydrogen peroxide (H2O2) as oxidant. The effect of different parameters such as leaching time, sulfuric acid...
Development of a Technological Process for the Production of Diesel Engines with Wear-Resistant Metallized Coating of Piston Heating Units.
The article shows that in most cases the reason for rejecting piston compression rings and cylinder liners is reaching the limit wear of the working rubbing surfaces and a conclusion is made about the advisability of app...