Performing System for Purifying Waste Water
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 1
Abstract
Status of water pollution can be controlled and reduced. For this purpose it uses two types of processes, applied more or less consistently by the management and technical design. The first group of processes is characterized by a "preventive manner of driving" and includes all methods aiming at limiting discharge residue in water.
Authors and Affiliations
Ștefan DRAGOMIR, Georgeta DRAGOMIR, Marian BORDEI
Keywords
Related Articles
- EP ID EP647145
- DOI -
- Views 68
- Downloads 0
Corrosion Behavior of Zinc Alloy Layers
The alloying of zinc with some additional elements in specific quantities could be reliably used in the hot-dip coating process. These elements conferr substantially improved performance to the end-product specially by i...
Determination of Friction Coefficient at Sliding Indentation of Laser Cladding with Ni – Cr – B – Fe – Al Alloy
To increase resistance to wear of the surface layers made from 0.45% C steel, a multilayer deposit by powder injection with the chemical composition Cr 8.9%, 4.5% Fe, 5.1% B, 2, 4% Al, 0.6% Cu, and Ni was tested in a mol...
The Temperature Effect on Severely Deformed Aluminium by High Pressure Torsion
The process of deforming materials started to attract the interest of the researchers after the development of the severe plastic deformation techniques. A number of aluminium samples were severe deformed by HPT method w...
Experimental Research Regarding the Evolution of Some Parameters of the Superficial Layer in Low Cycle Fatigue Process
The development of some mechanic engineering systems in, feasible to pressure vessels, aeronautics, ship building technology, requires a full investigation of the material features that are to be examined under a low cyc...
Laser Cladding of Ni-Cr-B-Fe-Al Alloy on a Steel Support
Multilayer coating by injection of powder with 8.9% Cr, 4.5% Fe, 5.1% B, 2.4% Al, 0.6% Cu; all reminded of Ni, as chemical composition, in melted bath by CO2 continuous wave laser connected to x-y-z coordinate table was...