PERIODICALLY VARIABLE TWO-TERMINAL IMPEDANCE DESCRIPTION AND MEASURING METHODS
Journal Title: Metrology and Measurement Systems - Year 2007, Vol 14, Issue 3
Abstract
The subject of this paper is the problem how to describe and measure impedance of a linear periodically time-varying (LPTV) two-terminal. If the two-terminal parameters change synchronously to the supply the two-terminal is able to reach a periodical steady state, but supplied with a sinusoidal source produces a non-sinusoidal voltage or current. The LPTV system in the steady state may be described with a circular parametric operator (CPO). Within the discrete time domain, this operator takes the form of a real entries matrix. The circular parametric operator may be transformed into the spectral circular parametric operator (SCPO) using a two-dimensional DFT. This version of description makes it possible to assess quantitatively the LPTV system coercion and response harmonics aliasing. This paper presents two methods of determination of the impedance CPO of the LPTV two-terminal based on current and voltage signal measurements. The first method is designed for operating in the frequency domain, the second one operates in the discrete time domain and takes advantage of a genuine identification algorithm. Some results of computer simulations are presented.
Authors and Affiliations
RADOSŁAW KŁOSIŃSKI
Keywords
Related Articles
- EP ID EP149814
- DOI -
- Views 65
- Downloads 0
ANALOG DOT RECORDING AS AN EXEMPLARY PROBLEM IN THE AREA OF DYNAMIC MEASUREMENTS<br />
Analog recorders as typical measuring instruments disappear from contemporary equipment due to progress of digital measurements and common possibilities of measurement data storage in a computer memory. However, recorder...
MEASUREMENT OF LUMINESCENCE IN COLOURED PRINTED MATERIALS
While fluorescent pigments have been used for many years, the formulation and quality control of coloured printed materials containing them, has been a challenge, primarily due to lack of appropriate instrumentation at a...
HE INFLUENCE OF THE BALL MATERIAL ON THE BRINELL HARDNESS
A Brinell hardness tester with carbide and steel balls was calibrated and thereafter the hardness of ten samples of steel STN 41 1600 was measured by four appraisers. The uncertainty of calibration and of the hardness me...
SIMPLE METHOD OF 3D ERROR COMPENSATION OF TRIGGERING PROBES ON COORDINATE MEASURING MACHINE
In this study an automatic, simple algorithm of systematic error corrections of a CMM touch triggering probe is proposed. The whole process does not exceed a standard calibration procedure done on coordinate machine befo...
INTELLIGENT MEASURING SYSTEM FOR CHARACTERISATION OF DEFECT CENTRES IN SEMI-INSULATING MATERIALS BY PHOTOINDUCED TRANSIENT SPECTROSCOPY
An intelligent measurement system for the characterisation of defect centres in semi-insulating materials is presented. The system utilises two-dimensional analysis of the photocurrent transients digitally recorded in a...