Pervaporation of Acetic Acid-Water Mixture Using Silica Membrane Prepared by Sol-Gel Method
Journal Title: Journal of Engineering and Technological Sciences - Year 2016, Vol 48, Issue 1
Abstract
Silica membranes were developed and tested for the separation of acetic acid and water by pervaporation. Thin microporous silica membranes were prepared on a porous alumina tube by sol-gel method using tetraethyl orthosilicate (TEOS) as the silica precursor. Colloidal and polymeric silica sols were prepared by hydrolysis of TEOS. The pervaporation experiment results revealed that the silica membranes showed water selectivity towards acetic acid. The permeate flux and the separation factor were strongly influenced by the composition of the silica sols. For a feed concentration of 90 wt% acetic acid, the permeate flux varied between 0.016 to 0.91 kg/m2 h, with the separation factor varying between 3.7 and 324.
Authors and Affiliations
Samuel P. Kusumocahyo
Keywords
Related Articles
- EP ID EP324321
- DOI 10.5614/j.eng.technol.sci.2016.48.1.8
- Views 107
- Downloads 0
A Modified Radial Basis Function Method for Predicting Debris Flow Mean Velocity
This study focused on a model for predicting debris flow mean velocity. A total of 50 debris flow events were investigated in the Jiangjia gully. A modified radial basis function (MRBF) neural network was developed for p...
The Effect of TiO2 Coating on Pile Penetration Depth in Clay
Pile driving tests were conducted using models of concrete piles with titanium dioxide (TiO2) coating and piles without coating. Pile surfaces coated with TiO2 become superhydrophilic, which enables water molecules in cl...
Tectonics and Geological Factors Controlling Cleat Development in the Barito Basin, Indonesia
Cleats are natural fractures within coal seams. This paper presents the results of regional cleat mapping and characterization in relation to coalbed methane (CBM) exploration and development in the Barito Basin, South K...
A Study on Adsorption Refrigerator Driven by Solar Collector Using Indonesian Activated Carbon
In the present work, the performance of an adsorption refrigerator driven by a solar collector was investigated. The adsorbent used in this study was 6.5 kg ordinary granular activated carbon of coconut shell produced in...
Study of Micro-hardness of High-Speed W9Mo4Co8 Steel Plates in Pendulum Grinding by Abrasive Wheel Periphery
In cutting tool assembly, grinding is the most important technological step of the finishing treatment, largely determining the workmanship. An increase of micro-hardness after grinding relative to the original one indic...