Physical and technological factors of the formation of detonation capacity of blasthole charges of emulsion explosives
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2017, Vol 79, Issue 1
Abstract
Modern conditions of mining are characterized by a constant increase in the depth of the pit, as a result of this there is a change in the geological and mining conditions. The obtaining of the mined rock is provided by using the drilling-and-blasting method as the main process that influences the technical and economic indicators of the next processes and enterprises in general. The effectiveness of the explosion in rocks depends on the technology of blasting. In scientific and technical literature the influence of various natural and technological factors on the process of the explosion has been studied in detail. We developed methods and recommendations for calculating the parameters of mass blasting used in common projects in the blasting operation and ensure their implementation of getting the rock mass of different coarseness of grading. However, these methods are based on traditional formulas and empirical dependencies, according to which the parameters of location and charge blasting accepted as the same, despite the fact that the blocks that blasted may include different types of rocks, and this, in turn, causes predatory yield of sub-standard fractions. Therefore, the implementation of the design parameters of the blasting should be based on modern scientific achievements, interrelationships of geological and technological indicators and parameters with the least expenditure of labor and time in the design process. The article analyzes the impact of the physical condition and the composition of emulsion explosive, geometric parameters and conditions of charge blasting, characteristics of dynamic processes in the charge and the decomposed array for the manifestation of the phenomenon of desensibilization emulsion explosives.
Authors and Affiliations
V. A. Poplavskyi, V. H. Kravets, A. M. Shukiurov, V. V. Pavlenko
Keywords
Related Articles
- EP ID EP255471
- DOI -
- Views 113
- Downloads 0
Visual evaluation of the possibility of rational product orientation in layered building at additive technologies installation
The developed subsystem of visual evaluation of triangulation models is presented. It is included in the system of technological planning of complex products manufacturing by additive technologies. This computer system a...
Combination of several algorithms while solving the forecasting problem
The forecasting problem is undoubtedly one of the most important for humanity, but also it is standing next to the most difficult ones because there is no guarantee that the predicted process behavior will not change dra...
Human factor in question of improving the efficiency of city public transport service
Methods of improving the efficiency of public transport operation were presented. An ergatic transport system was defined and key factors influencing the efficiency of its operation were indicated. The analysis of influe...
Methodical aspects of the quantitative, qualitative and hourly evaluation of the parameters of the reliability of the functioning of transport systems
A number of reasons for the low reliability of road transport systems and their possible consequences have been revealed. Classification of possible failures of the trucking transportation system was made through the fau...
Research of electrodynamics characteristics of antennas in the form of an open end of a rectangular waveguide with partial dielectric filling and excitation pin
The electrodynamics characteristics of the antenna in the form of an open end of a rectangular waveguide with partial dielectric filling and a pin of excitation are studied. In the antennas in the form of an open end of...