Plasma oxidized Ti6Al4V and Ti6Al7Nb alloys for biomedical applications
Journal Title: Engineering of Biomaterials / Inżynieria Biomateriałów - Year 2016, Vol 19, Issue 135
Abstract
Titanium and its alloys are one of the most popular metallic materials used in medicine for many years. Their favorable mechanical properties, high corrosion resistance and good biotolerance in an environment of tissues and body fluids, cause that they are widely used as construction material of orthopaedic dental and neurological implants. Their disadvantages are poor tribological properties manifested by high coefficient of friction, scuffing and tendency to formation of adhesive couplings. In many research centers the works on improving the unfavorable tribological properties of titanium alloys are conducted. They rely on the use of modern methods of surface treatment including the thermo-chemical methods (nitriding, carburizing, oxidation) and the synthesis of thin films using PVD and CVD methods. In the presented work the glow discharge oxidation was applied to improve the surface properties of two-phase Ti6Al4V and Ti6Al7Nb titanium alloys. The results include a description of the obtained structure of the surface layer, surface topography, micro-hardness, wear ratio and corrosion resistance. The obtained results indicate changes in the surface layer of the material. The surface hardness was more than doubled and the depth of increased hardness region was up to 85 microns. This, in turn, several times decreased the wear rate of the modified materials while reducing the wear rate of the countersample. At the same time the carried out thermo-chemical treatment did not cause any structural changes in the core material. The oxidation process preferably influenced the corrosion properties of titanium alloys. Both, significant increase in the corrosion potential (approx. 0.36 V), as well as increased polarization resistance were observed. The modified surfaces also retained a high resistance to pitting corrosion.
Authors and Affiliations
B. Pązik, J. Grabarczyk, D. Batory, W. Kaczorowski, M. Czerniak-Reczulska, P. Niedzielski
Keywords
Related Articles
- EP ID EP483538
- DOI -
- Views 49
- Downloads 0
Oszacowanie stabilizacji złamania trzonu kości udowej przez płytkę przykostną przy wykorzystaniu metody elementów skończonych
Złamania kości długich mogą być leczone na kilka sposobów. Jednym z nich jest zastosowanie płytki przykostnej. Płytka zamocowywana do kości umożliwia przeprowadzenie leczenia, ale z drugiej strony jest źródłem powstawani...
The influence of collagen from various sources on skin parameters
Collagen is the main component of connective tissue – it represents 30% of total proteins in the animal body. This protein occurs in a wide range of tissues, e.g. in bone, skin, tendon, ligaments and cornea. It provides...
Wpływ dodatku kwasów karboksylowych na czas wiązania i wytrzymałość na ściskanie cementów szkło-jonomerowych
Cementy szkło-jonomerowe powstają w czasie utwardzania kompozycji złożonych z dwóch składników: szklanego proszku i płynu wiążącego będącego wodnym roztworem polikwasów alkenowych. Wiązanie cementu polega na reakcji kwas...
Adhesion, growth and osteogenic differentiation of human bone marrow mesenchymal stem cells on positively and negatively charged and uncharged ferroelectric crystal surfaces
The cell-material interaction is significantly influenced by the physicochemical properties of the material surface, including its electrical charge. In this study, the effect of the surface polarity of ferroelectric LiN...
Adhesion of SiO2 layers deposited by means of sol-gel and ALD methods on 316LVM steel
The aim of this study was to evaluate the usefulness of SiO2 layers deposited by two methods - atomic layer deposition (ALD) and sol-gel, on the surface of stainless steel 316LVM used in application of cardiovascular imp...