PLASMAION METHODS OF CHANGING OPERATIONAL PROPERTIES OF SURFACE LAYERS OF THE MACHINED PARTS
Journal Title: Вестник Харьковского национального автомобильно-дорожного университета - Year 2018, Vol 82, Issue
Abstract
Problem. Improvement of production is difficult without the use of new progressive technological processes that can increase the resource and reliability, ensure the performance of parts and components in the most difficult operating conditions, at high temperatures and in aggressive environments, the effects of dynamic and contact loads. Goal. The purpose of the work is to study the restoration of the surface layer of the "shaft" type parts of automobile engines and other aggregates by the Plasma Immersion Ion Implantation and Deposition - PIII & D method. Methodology. The system under consideration refers to planar magnetron systems with the structure of a hollow cathode. The technological process involved the following operations: ion puri-fication in a glow discharge in an argon medium when contaminated surface layers are removed; pu-rification and heating in magnetron discharge in argon medium; cementation in a magnetron dis-charge in a medium of methane when the surface is saturated with carbon and the main heating of the substrate is carried out (additional heating is car-ried out, if necessary, by a resistive heater). Results. According to the results of the measurement of mica-hardness, for ion-implanted layers it is possible to achieve a hardness of about HV0.1 = 380, which means that the hardness of the coagulated surface can be increased by 1.8 times. Originality. The construction of the considered cathode allowed the magnetic field lines to come close to the surface where negative displacement potential was applied to the grounded walls of the vacuum chamber. This was necessary to ensure the initiation of a glow dis-charge by creating a configuration of a magnetic system with closed drift of electrons.
Authors and Affiliations
O. O. Baranov, S. S. Horbenko
Keywords
Related Articles
- EP ID EP476731
- DOI 10.30977/BUL.2219-5548.2018.82.0.62
- Views 63
- Downloads 0
TECHNOLOGY OF POLYMER-ABRASIVE FIBER MANUFACTURING
The process of research of polymeric materials with the subsequent creation of polymer-abrasive fiber and its testing to prove the right choice of the polymer and abrasive grain has been considered in the article.
ИССЛЕДОВАНИЕ ВЛИЯНИЯ МАСЕЛ НА КОЛИЧЕСТВО КАРБОНАТНЫХ ОТЛОЖЕНИЙ ПРИ ИНТЕНСИВНОМ ПЕРЕМЕШИВАНИИ СТОЧНЫХ ВОД С ГИДРАТНОЙ И ГИДРОКАРБОНАТНОЙ ЩЕЛОЧНОСТЬЮ
Представлены результаты лабораторных исследований влияния параметров скорости и продолжительности перемешивания, качества сточных вод на количество карбонатных отложений.
О ГИБКИХ ПЛАСТИНАХ, ДВЕ СМЕЖНЫЕ СТОРОНЫ КОТОРЫХ ЗАЩЕМЛЕНЫ, ДЛИННАЯ СТОРОНА – ШАРНИРНО ОПЕРТА, А КОРОТКАЯ – СВОБОДНА
Приведен расчет пластин по методу, разработанному автором, что позволяет решать задачу о напряженно-деформированном состоянии пластины при воздействии на нее любых поперечных внешних нагрузок.
EVALUATION OF RECYCLING EFFICIENCY OF VEHICLES RELEASED FROM OPERATION
The pressing problem of developing modern requirements of vehicle scrappage is considered in the given article. An indicator of recycling efficiency, which will make it possible to carry out the most significant activiti...
ОПРЕДЕЛЕНИЕ КОЭФФИЦИЕНТОВ СОПРОТИВЛЕНИЯ ДВИЖЕНИЮ ПО ВЫБЕГУ АВТОМОБИЛЯ
Точность дорожного метода определения коэффициентов сопротивления воздуха и качению Сх и f можно повысить, подобрав нужную зависимость f(v) в расчетной модели. Это позволяет опустить нижнюю границу рекомендуемого диапазо...