POSSIBILITIES FOR DETERMINING THE INTERFERENCE BETWEEN A POWER SUPPLY NETWORK AND A CONVERTER FED DRIVE
Journal Title: Power Electronics and Drives - Year 2017, Vol 1, Issue 1
Abstract
Background: This article presents the methodology that enables the analysis of the impact of the converter drive on the power supply network and the impact of the network on the drive to be performed. Material and methods: The key points in such an analysis are: the use of an appropriate measuring system that is chosen in terms of possibilities, the ability to take precise measurements, the correct determination of drive parameters, the simulation that reflects the normal behaviour of a system, the determination of quality of operation parameters that are relevant due to the impact of the drive on the power supply network, and arriving at the right conclusions after the analysis. Results: The applied methodology, which allows for the multivariate analysis of the impact of the converter drive on the power supply network and the possibility of analysing the impact of the network on the drive. Conclusions: The comparison of measurement results with the drive simulation results indicate that there is high correspondence between these waveforms, both in reference to the voltages and currents powering the frequency converter and the currents powering the motor.
Authors and Affiliations
Arkadiusz Anyoni Gardecko, Ryszard Beniak
Keywords
Related Articles
- EP ID EP224741
- DOI -
- Views 51
- Downloads 0
Smart Grid Condition Assessment: Concepts, Benefits, and Developments
Background: In this paper, condition assessment of electric grid assets will be discussed and illustrated within the context of smart grid principle. This paper aims to add significant contribution to a smart grid theory...
A METHOD OF REDUCING SWITCH COUNT IN THREE-LEVEL NPC INVERTER – ANALYSIS IN STEADY STATES
The aim of the paper is to present a proof of concept for a new method of modulation which reduce switch count in three-level neutral point clamped (3L-NPC) inverter. The method is an implementation of space vector modul...
AN OVERVIEW OF DESIGN, CONTROL, POWER MANAGEMENT, SYSTEM STABILITY AND RELIABILITY IN ELECTRIC SHIPS
With the fast development of power electronics techniques, electrification of shipboard power systems (SPS) is an unstoppable trend, and the concepts of electric ships (ESs) and all-electric ships (AESs) emerge. In order...
SINGLE-PHASE LINE START PERMANENT MAGNET SYNCHRONOUS MOTOR WITH SKEWED STATOR
Background: The article deals with single-phase line start permanent magnet synchronous motor with skewed stator. Material and methods: Constructions of two physical motor models are presented. Field-circuit motor models...
Introduction to the Special Section on State and Parameter Estimation Methods for Sensorless Drives
This short article constitutes an introductory part the Special Section on State and Parameter Estimation Methods in Sensorless Drives. In the current issue of the journal the first part of this Section is published. Acc...