POSSIBILITIES OF APPLICATION OF NEW MATERIALS FOR CHAIN DRUMS OF ARMOURED FACE CONVEYORS WITH AN INCREASED WEAR RESISTANCE
Journal Title: Tribologia - Year 2013, Vol 247, Issue 1
Abstract
The primary purpose of this study was to carry out comparative research concerning the wear properties of materials used for chain drums, both of domestic and foreign production, as well as of ADI cast iron, which was considered as a material highly suitable for use in manufacture of drums. As part of the study, a new test rig was developed and made in order to allow testing the process of wear in the presence of an additional abrasive material. On the basis of the experimental research concerning the wear properties, it has been found that the highest wear resistance among the analysed materials had the nodular cast iron containing approximately 1% of Cu and subjected to isothermal quenching in salts at a temperature of 270±5°C (variant: ADI CU C). It should be emphasized that each of the considered variants of ADI cast iron was characterized by a wear resistance better than that of steels and cast steels that are already in use or very similar. In terms of quality, the results were similar to the results of the research on abrasive wear of the ADI cast irons and steels presented by other authors in their research.
Authors and Affiliations
Andrzej Wieczorek
Keywords
Related Articles
- EP ID EP270330
- DOI -
- Views 26
- Downloads 0
MODELLING THE TRIBOLOGICAL PROPERTIES OF MINERAL OIL WITH ANTI-WEAR AND ANTI-SEIZURE ADDITIVES
The article presents the results of experimental research of mineral oils with the anti-wear and anti-seizure additives. The experiments were designed in accordance with two methods, namely: the designs of experiments fo...
STUDY OF SELECTED USABLE PROPERTIES OF THE TOP LAYERS OF WELD OVERLAYS PRODUCED BY LASER TECHNOLOGY FOR APPLICATIONS IN THE POWER INDUSTRY
The paper presents the results of laboratory tests of test specimens produced by multi-layer laser padding alloy Stellit Co-6 powder on a substrate with heat-treated X22CrMoV12-1 alloy steel. Multilayer laser padding was...
Doświadczalne określenie rozkładu nacisków bocznych w formie podczas zagęszczania mieszanki wapienno-piaskowej
W pracy przedstawiono wyniki badań dotyczące nacisków bocznych podczas zagęszczania mieszanki wapienno-piaskowej na ścianki formy o przekroju kołowym. Do tego celu wykorzystano stanowisko wyposażone w czujniki tensometry...
IN-SERVICE ABRASION RESISTANCE EXAMINATIONS OF METAL SHEET LININGS USED IN THE BUCKET WHEEL FOR THE SRs 1200 WHEEL EXCAVATOR
This paper compares the abrasion resistance (values) of metal sheets forming a rotating chute of the bucket wheel in the wheel excavator operating in a brown coal mine. Six different types of metal sheets, including thre...
Właściwości tribologiczne kompozytów kauczuku butadienowo--akrylonitrylowego zawierających nanorurki węglowe