POSSIBILITY OF PROCESSING PARAMETERS OBTAINED FROM ON-BOARD FLIGHT DATA RECORDERS FOR DIAGNOSTICS AND PREDICTING RELIABLE OPERATION PERIODS OF IMPORTANT AIRCRAFT EQUIPMENT
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2017, Vol 95, Issue 95
Abstract
In recent years, much attention has been paid to the recording of flight data in order to provide objective information concerning routine and emergency in-flight situations. The data recorded can be used for assessing the air mission execution by the pilot and flight safety breaches, for specifying some damage to the equipment, and for preventing faulty equipment from being used in flights. Flight data recorders (FDRs) are commonly known as “black boxes”. This article presents issues related to flight data acquisition and preparing the data for later use, as well as their impact on flight safety. The systems recording and processing selected parameters not only enable ongoing diagnostics, but also make it possible to predict the period of further reliable operations and to analyse the causes that led to possible damage. In addition to improving economic indicators of the aircraft operation, flight safety is improved. Obviously, the article will only discuss certain ways of enhancing safety by applying the processing of data obtained from FDRs. Nevertheless, I believe it will offer an overall view of how important it is to collect, process and properly analyse such data for diagnostics, prediction and flight safety.
Authors and Affiliations
Krzysztof OGONOWSKI, Jarosław KOZUBA
Keywords
Related Articles
- EP ID EP329290
- DOI 10.20858/sjsutst.2017.95.13
- Views 57
- Downloads 0
INFLUENCE OF CYLINDER CUTOFF ON ENGINE VIBROACOUSTICS SIGNAL
The results of investigations of Fiat Panda SI engine with 1100 [ccm] are presented in this paper. Research goal was estimate of cylinder cutoff influence on engine vibroacoustics signal.
EVALUATION OF ASSUMPTIONS IN FITNET FATIGUE LIFE CALCULATIONS – CHOSEN PROBLEMS
Development and the need of unification of fatigue life calculation methods of structural elements led to elaborate proper calculation procedures. The procedures were initially developed to apply in specialist areas of t...
RESEARCH AND APPLICATION OF UNIVERSAL REGULATION SYSTEM IN ORDER TO MASTER THE SOURCE OF MECHANICAL SYSTEMS EXCITATION
In general terms the mechanical systems (MS) means the system of driving and driven machines arranged to perform the required work. We divide them into MS operating with constant speed and MS working with a range of sp...
THE TEST PROGRAMME CONCERNING AIRCRAFT POSITIONING AND TRAFFIC MONITORING – PART I
The article presents results of the researches of the range to determine of the transmission’s data with using of the standard modems UHF Satellite on the transmission frequency of the 460 MHz and the regulating power 1...
SELECTED ASPECTS OF APPLICATION OF THE „NEW APPROACH” NORMS AND TECHNICAL REGULATIONS IN THE ROAD BUILDING
Process of European Standars (EN) implementation to Polish Standars (PN) archive results in improvement of actions connected with road investments performance. In the presence of constantly emerging new technical and org...