Possibility of using textile waste as an energy in cement industry
Journal Title: Mašinstvo - Year 2018, Vol 15, Issue 4
Abstract
The remains of natural and artificial materials in the textile industry are a problem in the technological process because it is a continuous production of waste and related to the need for everyday care. In Bosnia and Herzegovina there are currently no facilities for the material utilization, recycling or reuse of textile waste. Municipal waste disposal cannot be the place for its final disposal. On the other hand, textile waste contains potential for use as an energy source and the cement industry with specific advantages in the use of alternative fuels is the optimal solution for the disposal of waste from the textile industry from the ecological and economic point of view
Authors and Affiliations
Muvedet Šišić
Keywords
Related Articles
- EP ID EP435841
- DOI -
- Views 83
- Downloads 0
Fracture Mode-Mixity in Symetrical Beam Specimens: FPZ Length Influence
Mixed-mode fracture in delamination test utilizing double cantilever specimens loaded with bending moments is investigated in the paper. FEM simulations are performed using cohesive zone model where different configurati...
Improvement of Quality Management System – Case Study of a Metal Industry Company
Continuous monitoring and improvement of quality management system is a must for a modern company to operate smoothly. Properly conducted audits and application of preventive correction actions are important elements of...
Application of Compressed Air in Pit “Haljinići”, JP EP BiH D.D. - Sarajevo, ZD RMU ”Kakanj” d.o.o. Kakanj
During analysis of main problems in the pit "Haljinići", the drive energy represents one of the most important phases of the operation for functioning of the section, so imying and solving problems related to this segmen...
Combined Experimental-Numerical Analysis of Elastic Balls Subjected to Compression Between Plates
This work presents the combined method for determination of mechanical characteristics of elastic balls filled with fluid by using compression test and appropriate analytical-numerical method. Ordinary playing balls, bei...
Toughness and Fatigue Analysis of Al 6xxx Alloys
Mechanical properties of every material play important role during material selection for any mechanic system. The main mechanics property which is crucial for material selection is Toughness. The paper present some of t...