Pre-processing of Images as a Source of Additional Information for Image of the Natural Polymer Composites
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2018, Vol 25, Issue 2
Abstract
Image processing is one of the methods of analyzing and obtaining new information. Image processing methods can be applied to any im-age. Image processing is used in various fields of research. Among the stages of image processing, the stage of image pre-processing is im-portant. This stage allows increasing the efficiency of the analysis of the original image. We considered the use of pre-processing for the analysis of natural polymer composites image. In this paper, we de-scribe the possibilities of automatic processing of natural polymer com-posites image.
Authors and Affiliations
Cornelia Victoria Anghel Drugarin, Vyacheslav V. Lyashenko, Muncho J. Mbunwe, M. Ayaz Ahmad
Keywords
Related Articles
- EP ID EP442162
- DOI -
- Views 119
- Downloads 0
The Structural Analysis of the Classic Constructive Solution of a Bridge Deck with a Railroad – Part II
Using the analysis from the first part of the paper [1], the deck geometry is analyzed on several constructive solutions, which differ in the way of strut and lonjeron placement and in the way of loads placement. The op...
Modeling of the Machining Surface Roughness Parameters for Steel Difficult to Machining
The objective of this study is to examine the influence of machining parameters on surface finish in turning. A new approach in modeling surface roughness which uses design of experimentsis described in this paper. The v...
Investigations into the Mechanical Properties and Microstructural Behavior of Foreign and Locally Fabricated Brake Disc
The present work reports investigations on mechanical and microstructural properties of foreign and locally fabricated brake disc. From safety point of view, brake disc is a crucial component of the braking system. Fore...
Experimental Procedure to assess Damages of Welded Beams
This paper presents an experimental procedure to assess damages of welded beams, the weld being transversal to the longitudinal beam axis. It consists of comparing the natural frequencies in intact and damaged state, cal...
Digital Speed Cascade Control, using Scilab / Xcos Environment
This paper presents an application of digital cascade control implemented in Scilab / Xcos environment, using a P type regulator for the position adjustment circuit, a PI controller for the speed circuit adjustment; the...