Precyzyjne cięcie laserem tlenku cyrkonu IV (ZrO2)
Journal Title: Zarządzanie Przedsiębiorstwem - Year 2017, Vol 0, Issue 2
Abstract
Precision laser machining of a difficult to machine materials is a complex issue and requires the involvement of the wide knowledge and experience in the field of science materials and physical phenomena occurring in the within the interaction site of the laser beam with the material workpiece. Correct selection of the laser source and equipment system with appropriate instrumentation allows the processing of materials in an efficient and cost-effective way and also allows to fulfill the requirements for treatment of the materials on a micro scale. From the analysis of the results it can be concluded that the edges resulting from laser treatment carried grooves are sharp (samples 9, 10, 11), which predisposes the type of processing to perform the blades of the cutting tools. Depth obtained in these tests grooves (single-pass laser beam) may indicate a high performance cutting process of cutting teeth. In view of the aforementioned facts, it is expected to shorten the preparation time of the cutting blade, thereby reducing production costs. As a result, it is possible to increase the competitiveness of companies doing good quality tools made lower than the standard cost-effectively, and thus this type of solution has the potential of development for native Polish enterprises, so that they offer can become complementary to the tycoons on the Polish market aspect of the production of custom, dedicated ie. “tailor-made” tools. Based on the study it can be concluded that the use of DPSS Nd: YAG laser (λ = 532 nm), with appropriate selection of process parameters for precise and efficient laser shaping of difficult to cut materials, such as described in the work – zirconium dioxide. Further studies will aim to establish guidelines for the planning process precision laser cutting of other materials from the group of difficult ones, such as PCD, diamond, Al2O3 (sapphire) or c-BN. This is particularly important from the point of view of the precise shape of cutting tools used widely in the aerospace, automotive and carpentry.
Authors and Affiliations
A. Nowak, D. Wyszyński
Keywords
Related Articles
- EP ID EP352957
- DOI -
- Views 34
- Downloads 0
Obliczanie składowej jakości oee przy wielu operacjach technologicznych
Aim of this article is to present way of calculation of the OEE rate for work stations. The OEE rate is a tool used in searching for the best way of improvement of functionality of a work station. During the research in...
Podsystem ergonomiczny jako zasób informacji eksploatacyjnej maszyn
Steering the process of running requires information assets on ways of shaping the operational original system. As GUS accepted in 2011 that the human factor was the major cause of industrial accidents, there occurs a ne...
Badania wybranych systemów lokalnego pozycjonowania w przestrzeni
The paper presents local positioning systems of objects in area using different speeds of propagation of radio waves and ultrasound. Position of the object in three-dimensional limited area is determined by trilateration...
Zmiany wewnątrz organizacji w opinii osób zatrudnionych na umowy pracownicze i niepracownicze
The article presents the changes in modern enterprises. Issuing from an analysis of selected literature changes in the organization have been shown. On the basis of personal research we have indicated areas of change tha...
Koncepcja zastosowania narzędzi predykcji w projektowaniu harmonogramów odpornych
The development of competitiveness on world markets caused the need to increase production flexibility. An essential tool in achieving this purpose could be production scheduling. Unfortunately, the production process is...