Prediction of Spot Welding Parameters for Dissimilar Weld Joints
Journal Title: Bonfring International Journal of Industrial Engineering and Management Science - Year 2016, Vol 6, Issue 4
Abstract
Development of manufacturing systems are needed to invent new kind of methodology for joining process in current research and development. Spot welding technologies are widely applied in non-conventional joining process. In this investigation predicted the mechanical properties like tensile strength and Hardness. The hardness evaluated in different regions of the spot welded Stainless steel sheet and Mild steel sheet joints such as welded zone, heat affected zone and parent material subjected to different Welding Parameters. The Experimental procedures are developed by factorial design and the regression model developed from the experimental results through Response surface methodology. The variable parameters are Electrode force, Weld Current and the Weld time. The measurable parameters are Tensile strength and hardness. The optimization process is carried out by Response surface methodology and the optimized parameters are defined the quality of the welded steel joints. The optimized welded parameters are expressed the effective joining and improve the quality of the welded member.
Authors and Affiliations
Vijaya Sankar B. , Daniel Lawrence I. , Jayabal S.
Keywords
Related Articles
- EP ID EP403546
- DOI 10.9756/BIJIEMS.7542
- Views 129
- Downloads 0
Analysis and Optimization of Process Parameters in EDM of RENE 80 Using Taguchi Method
The present work aims to carry out an experimental investigation into the electrical discharge machining process while machining of Nickel super alloy RENE80. Taguchi L9 orthogonal array is used to plan the experimental...
The Effect of Microstructure on 3 Body Abrasive Wear Behavior of Hardfacing Alloys
Hardfacing is one of the most useful and economic ways to improve the performance of components submitted to severe wear conditions. A study was made to compare the microstructure and abrasion resistance of hardfacing al...
An Empirical Study on Teaching Professionals' Work-Life Balance in Higher Learning Institutions with Special Reference to Namakkal District, Tamilnadu
Many institutions of higher learning in India are swiftly integrating the advanced technology, mostly Information and Communication Technology (ICT) into their teaching learning process. This changing paradigm is putting...
Development of Aluminum Foams by Different Methods and Evaluation of its Density by Archimedes Principle
Methods for producing metal foams are many, but obtaining repeatability in the properties is very difficult. The main challenge posed by the metal foam is that obtaining homogeneous porosity. Although lot of problems inv...
Geotechnical Properties of Problem Clay Stabilized with Crumb Rubber Powder
Mangalore tiles are a type of tiles native to the city of Mangalore, India. These are widely used as a roofing material throughout India, especially in coastal regions to drain off the rain water. But in recent times the...