PREPARATION AND APPLICATION OF MOLECULARLY IMPRINTED FIBER-FI LLED NEEDLE TRAP EXTRACTION DEVICE IN REAL SAMPLES

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

In this study, a needle trap extraction device with a molecularly imprinted polymer coated on Dupont fibers was developed for extraction. A number of heat-resistant Dupont fibers were longitudinally filled into a glass capillary, followed by coating with a molecularly imprinted polymer as an extraction medium and were used to extract volatile organic compounds from environment. Subsequently, the extracted analytes were analyzed by gas chromatography. The linear detection range, recovery, limit of detection (LOD), limit of quantification (LOQ) was studied to evaluate the method. Calibration curves for benzene, toluene, ethylbenzene, and o-xylene were linear in the concentration range of 1–250 μg/L, and the corresponding correlation coefficients exceeded 9897. The LODs and LOQs of the analytes were in the ranges of 15–25 ng/L and 35–65 ng/L, respectively

Authors and Affiliations

Xiaoyang Guo, Xiyue Wang, Bo zhu, Lili Lian, Hao Zhang, Wenxiu Gao, Yuanyuan Tian, Dawei Lou

Keywords

Related Articles

APPLICATION OF AHP-ENTROPY METHOD AND LSSVM IN THE ASSESSMENT AND FORECASTING OF TRANSFORMER OPERATING STATUS

In order to meet the needs of fault troubleshooting, maintenance decision and on-line prediction, the method of the transformer health index based on AHP-entropy is proposed. The cross complex matter elements are establi...

THE INFLUENCE OF MAGNETOSTRICTIVE TRANSDUCER RADIATION PLATE MATERIAL ON RADIATION SOUND FIELD DISTRIBUTION

The radiant panel is transducer of the sound source output device, the installation space constraints under the condition of enrollment size, increase the radiation plate vibration amplitude of the focus of research. Thi...

STATE FEEDBACK CONTROL OF OUPLED-TANK LEVEL SYSTEM BASED ON PO LE-PLACEMENT

A state feedback control strategy for Coupled-tank level system based on Pole-Placement is presented in this paper. First, the operation point is determined when given the desired the controlled level of the lower tank a...

ELECTROCHROMIC NANOCOMPOSITE FILM BASED ON MONOLACUNARY DAWSON-TYPE POLYOXOMETALATE AND TIO2 NANOWIRES

Electrochromic (EC) nanocomposite films consisting of monolacunary Dawson-type polyoxometalates (POMs) K10P2W17O61 (P2W17) and TiO2 nanowires (TiO2 NW) were fabricated by combining hydrothermal and sol-gel spin coating a...

DEVELOPMENT OF REAL-TIME SIMULATION PLATFORM FOR TANK LEVEL CONTROL SYSTEM BASED ON WINCC

This paper uses WinCC configuration software and based on the mathematical model of Coupled-Tank, which writes the program code through C script, solving the tank differential equation by Euler method, and uses the incre...

Download PDF file
  • EP ID EP414797
  • DOI 10.26480/icnmim.01.2018.303.305
  • Views 62
  • Downloads 0

How To Cite

Xiaoyang Guo, Xiyue Wang, Bo zhu, Lili Lian, Hao Zhang, Wenxiu Gao, Yuanyuan Tian, Dawei Lou (2018). PREPARATION AND APPLICATION OF MOLECULARLY IMPRINTED FIBER-FI LLED NEEDLE TRAP EXTRACTION DEVICE IN REAL SAMPLES. Topics in Chemical & Material Engineering (TCME), 1(1), 303-305. https://europub.co.uk/articles/-A-414797