THE INFLUENCE OF MAGNETOSTRICTIVE TRANSDUCER RADIATION PLATE MATERIAL ON RADIATION SOUND FIELD DISTRIBUTION
Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1
Abstract
The radiant panel is transducer of the sound source output device, the installation space constraints under the condition of enrollment size, increase the radiation plate vibration amplitude of the focus of research. This paper only considering the influence of the materials of radiant panel vibration amplitude and has carried on the finite element software WORKBENCH and ATILA software analyzes the magneto strictive transducer radiant panel material influence on vibration amplitude frequency characteristics and the influence of sound field distribution inside the cavity. Results show that the same incentives and boundary condition, the aluminum material appeared radiant panel piston type when the frequency is highest, has the biggest output displacement which was of 4.48 to 24.8 times to the other materials panel; After joining the cavity body, aluminum radiant panel inside the cavity acoustic pressure amplitude is the largest and the panel radiated sound pressure amplitude is of 1.2 to 2.4 times than the other material. Above conclusion for frequency miniature transducer radiant panel provides a strong basis for the design of the work
Authors and Affiliations
Yu Wenxin, Ding Yanchun, Liu Haibo
Keywords
Related Articles
- EP ID EP414794
- DOI 10.26480/icnmim.01.2018.293.296
- Views 51
- Downloads 0
GREEN SYNTHESIS OF MCM-49 ZEOLITE USING LOW TOXICITY TEMPLATE
MCM-49 zeolites have been synthesized by dynamic hydrothermal method with piperazine (PIP) as low toxicity template to replace traditional cancerogenic hexamethyleneimine (HMI). The structure and physical-chemical proper...
SEPARATION OF DIISO-PROPYL ETHER+ISO-PROPANOL+N-PROPANOL BY EXTRACTIVE DISTILLATION AND PRESSURE-SWING DISTILLATION: SIMULATION AND ECONOMIC OPTIMIZATION
We have studied, simulated and evaluated economically two separation alternatives of a ternary mixture made up of 25 mol% diisopropyl ether, 60 mol% isopropyl alcohol and 15 mol% n-propyl alcohol by means of a practical...
PREPARATION AND CHARACTERIZATION OF CATALYST FOR REDUCTION AMINATION OF ETHANOLAMINE BY DIFFERENT METHOD
The NiO-CuO-CaO/Al2O3 composite oxide catalyst was prepared by impregnation method, CO-precipitation method and grinding microwave method with Al2O3 as carrier, Ni-Cu bimetal as active component and Ca as additive. And t...
SYNTHESIS AND CHARACTERIZATION OF EPOXY-MODIFIED WATERBORNE UNSATURATED POLYESTER AND THEIR USE IN FIBER SIZING AGENTS
Epoxy-Modified Waterborne unsaturated Polyester (WUP) were synthesized by phthalic anhydride, dipropylene glycol, maleic anhydride, epoxy resin, methyl tetrahydro phthalic anhydride and triethylamine. The chemical struct...
MULTIFUNCTIONAL XY CURVE DRAWING OF FUNCTION TREND CONTROL BASED ON WINCC
Using C script language to process data and control variables of WINCC function trend control, a multi-function XY curve drawing based on WINCC function trend control is implemented. This method creates multiple custom a...