Preparation and characterization of La0.9Sr0.1Ga0.8Mg0.2O3-δ by glycine-nitrate combustion method
Journal Title: Science Paper Online - Year 2008, Vol 3, Issue 4
Abstract
The intermediate-temperature electrolyte with perovskite-type La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM) was synthesized using glycine-nitrate combustion and solid state reaction respectively. XRD, DC four-probe and SEM were applied to analyze the crystal structure, ionic conductivity and microstructure. The research results show that the single phase of the LSGM synthesized by glycine-nitrate combustion method can be obtained at a sintering temperature of 1400℃ for 2 h, which is obviously lower than that of LSGM prepared by solid state reaction method. A fine microstructure in the product was detected by SEM. Its conductivity reached 0.1 S•cm-1 at 850℃, which is higher than that of the LSGM prepared by solid state reaction method. It can be concluded that the glycine-nitrate combustion method is favorable in lowering the sintering temperature, enhancing the purity and improving the electrical property of the LSGM
Authors and Affiliations
Yingping ZHENG , Yan ZHA, Wenjun GAO, Yueming SUN
Keywords
Related Articles
- EP ID EP123752
- DOI -
- Views 91
- Downloads 0
砷致小鼠脂质过氧化及锌、硒对砷的干预实验研究
【目的】探讨砷对小鼠血清及肝脏脂质过氧化的影响及锌、硒对它的干预作用。【方法】采用亚慢性毒性实验方法,实验结束后分别测定小鼠血清、肝脏组织中脂质过氧化产物丙二醛(MDA) 和谷胱甘肽S-转移酶(GST)含量及超氧化物歧化酶(SOD)、谷胱...
QoS techniques in mobile Ad hoc networks
Due to the dynamic topology and bandwidth constraint of Mobile Ad hoc Networks(MANET),supporting Quality of Service in MANET has great difference with that in fixed wired network. In this paper we present the techniques...
Model reduction using BPOD and its application to aeroelastic active control
It is badly limited to apply optimization and control into fluid dynamic system as its high-dimensional and nonlinear characteristic. Model reduction technique is a powerful tool to solve the problem. In this paper, the...
The fast multipole method to solve two kinds of Green’s Functions
The higher order boundary element method (HOBEM) has been widely used in engineering calculations, but it is difficult to solve the large-scale problems because of large computation cost and computer storage needed to co...
CFD simulation of flow field and mixing performance in a microstructured mixer
A multipore microtructured mixer has been developed by our group, our experimental results show that the micromixer has very high mixing performance. This paper presents the CFD simulation results for better understandin...