Preparation and dielectric enhancement of nickel-coated β-SiC nanoparticles
Journal Title: Science Paper Online - Year 2007, Vol 2, Issue 5
Abstract
A nanoscale core-shell structure of β-SiCP-Ni has been prepared at lower temperature by a simple and convenient electroless plating approach. The core-shell nanoparticles have been characterized by means of XRD and TEM. The results show that β-SiC nanoparticles (β-SiCP) are coated by a uniform and continuous nickel shell. The mechanism based on the theory of electroless plating and palladium catalysis has been discussed in details about core-shell structure of β-SiCP-Ni. Dielectric permittivities of the original silicon carbide nanoparticles (β-SiCP) and nickel-coated β-SiCP in paraffin wax are measured respectively in the GHz frequency range from 8 to 12 GHz. The real part and dielectric loss tangent of the nickel-coated β-SiCP are significantly enhanced. The origin of the enhancement is theoretically discussed, and also explained by the change of surface electrical conduction behavior of β-SiCP and nickel-coated β-SiCP.
Authors and Affiliations
Guizhen Zou, Maosheng Cao, Yuqing Kang
Keywords
Related Articles
- EP ID EP91406
- DOI -
- Views 131
- Downloads 0
浮选柱多输入/多输出控制系统设计及应用
分析和阐述了浮选柱监控系统的控制要求和原理，采用多变量输入/多变量输出的设计思路，选用开物2000工业组态软件和PLC作为开发工具。通过球形浮子-超声波探测器测定浮选柱液位的高度，采用在线自调整参数的模糊控制、PID控制和充气量控制...
PS-TEPA和PS-g-PEG树脂合成及<br /> 吸附蛋白性质比较<br />
本文以吸附水溶液中蛋白质为目的，考察PS-TEPA和PS-g-PEG两种带聚离子型长链聚苯乙烯树脂的合成条件和吸附牛血清蛋白能力。结果发现，当反应温度为85 ℃，四乙烯五胺的投料量为16 mL，反应时间为12 h时，产物PS-g-TEPA型树脂的增重率和蛋...
Functionalization of vinyl cubic Ia3d mesoporous silica for immobilization of penicillin G acylase
Vinyl cubic Ia3d mesoporous silica (V-CIMS), prepared by co-condensation method, was epoxidized by m-Chloroperbenzoic acid to epoxy group-functionalized mesoporous silica (E-CIMS). The above mesoporous silicas were chara...
Experimental investigation on the interaction between momentumless wake and rotor based on PIV
The mixed flow field of the stator wake interaction with rotor with and without injection through a slit along the stator’s rear end was measured by PIV (particle image velocimetry). The velocity fields, velocity contour...
一种新型壳侧支撑结构的管壳式换热器<br /> ——花隔板换热器的实验研究<br />
本文提出管壳式换热器壳侧支撑结构的一种新形式——花隔板。为研究花隔板换热器的换热和流阻性能，利用相似原理进行相关实验，得到花隔板换热器的换热准则关系式和流动阻力准则关系式。与传统单弓形折流板换热器进行比较,花隔板换热器的综...