Preparation and Study of Waterborne Asphalt Pavement Maintenance Agent
Journal Title: Materials Science: Materials Review - Year 2017, Vol 1, Issue 1
Abstract
The precursor Ni0.76Co0.1Mn0.1 (OH) 2 was prepared by coprecipitation method. The precursor was mixed with Mg (OH) 2 / Zn (NO3) 2 / TiO2 and LiOH.H2O, Li2CO3 to synthesize doped lithium Ion layer positive electrode material Li [Ni0.8-xCo0.1Mn0.1Mx] O2 (x = 0.04). The effects of synthesis conditions on the chemical properties of the composites were discussed. The synthesized samples were prepared by scanning electron microscopy (SEM), thermogravimetry - diff erential thermal analysis (TG / DTA), X - ray diff raction (XRD) and constant current charge - Testing and characterization. The results show that the crystallinity of Li [Ni0.8-xCo0.1Mn0.1Mx] O2 (x = 0.04) prepared at 900 ℃ for 20 h is good, and it has good layered structure. The properties of the doped elements The results show that the electrochemical performance of the samples with Mg and Zn is good, and the fi rst discharge capacity is 0.1.5mA.h / g and 144.2 mA.h / g (2.8 ~ 4.6 V vs Li + / Li ), The fi rst charge and discharge effi ciency was 51.8% and 58.1% respectively, and the capacity retention rates after 8 and 10 cycles were 92.4% and 78.5% respectively. The first discharge capacity of the Ti doped sample was 51.3 mA.h / G, poor electrochemical performance
Authors and Affiliations
Chunfei Yuan,Qinglai Song,Ningning Zhao
Keywords
Related Articles
- EP ID EP679049
- DOI -
- Views 188
- Downloads 0
Study of Formation of Oxide Nanostructures on the Surface of Radiation-oxidated Aluminum
Reflection IR spectroscopy, atomic force microscopy (AGM), and electrophysical measurements were used to investigate the formation of surface oxide nanostructures during the radiation oxidation of metallic aluminum in co...
Study on fl ame retardant ABS
Flame-retardant ABS resin was prepared by adding flame retardant, toughening agent and dispersing silicone oil with acrylonitrile-butadiene-styrene resin (ABS, grade 0215 A) as raw material. The results showed that in th...
Assessment of the Effect of Hydrolysed Starch Graft Copolymers Application on Soil Nutrient (Phosphorus and Nitrogen) Retention
The effects of the application of the graft copolymers (Hydrolyzed starch-g-polyacrylonitrile (HSPAN) and Hydrolyzed starch-g-polyacrylic acid (HSPAA)) on the nitrogen (N) and phosphorus (P) retention capacity of soil wa...
Study on the influence of the springback on the hole expansion ratio characterization
Material formability has become one of the main problems, together with the springback, when stamping high added-value components for the automotive industry. The pursuit of weight reduction has led to higher strength al...
Optimization of laser cladding process for additive repair of high temperature and high pressure valve sealing surface
Laser cladding technology is highly suitable for the remanufacturing of thin-walled and easily deformable parts due to its concentrated energy density. Due to the high temperature and high pressure corrosion environment,...