Study of Formation of Oxide Nanostructures on the Surface of Radiation-oxidated Aluminum
Journal Title: Materials Science: Materials Review - Year 2018, Vol 2, Issue 1
Abstract
Reflection IR spectroscopy, atomic force microscopy (AGM), and electrophysical measurements were used to investigate the formation of surface oxide nanostructures during the radiation oxidation of metallic aluminum in contact with water. It is revealed that the radiation modification of the surface relief is accompanied by the formation of oxide nanolayers, the defectiveness of which is determined by the irradiation time. It is shown that the formation of oxide nanolayers in the region of absorbed dose (0.5-120 kGy) occurs in three stages, which is accompanied by a decrease in electrical conductivity by 5 orders and an increase in the thickness of the oxide layer by an order of magnitude. The role of surface intermediate-active particles in the formation of oxide nanostructures is considered.
Authors and Affiliations
Gadzhieva N. N
Keywords
Related Articles
- EP ID EP679042
- DOI -
- Views 188
- Downloads 0
Cooling Rate, Hardness and Microstructure of Aluminum Cast Alloys
This experiment investigated the cooling curve behavior, hardness and microstructure of two aluminum alloys produced by casting process. There are Al-1.37Zn-1.19Si and Al-1.66Si-1.35Zn derived from melting and alloying a...
Preparation and Study of Waterborne Asphalt Pavement Maintenance Agent
The precursor Ni0.76Co0.1Mn0.1 (OH) 2 was prepared by coprecipitation method. The precursor was mixed with Mg (OH) 2 / Zn (NO3) 2 / TiO2 and LiOH.H2O, Li2CO3 to synthesize doped lithium Ion layer positive electrode mater...
Photovoltaic power generation system
The potential crisis of energy and the deterioration of ecological environment make the world's cumbersome development of renewable energy including new energy, including solar energy. Traditional energy in the coal, oil...
Optimization of laser cladding process for additive repair of high temperature and high pressure valve sealing surface
Laser cladding technology is highly suitable for the remanufacturing of thin-walled and easily deformable parts due to its concentrated energy density. Due to the high temperature and high pressure corrosion environment,...
Quasi-particle Contribution in Thermal Expansion and Thermal Conductivity in Metals
In this paper the modified Landau theory of Fermi Liquids was used to compute the thermal expansion and thermal conductivity of quasi-particles in metals. The result revealed that as temperature increases the thermal exp...