Press-Fit Evaluation and Study of Displacement in Temperature Changes
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2018, Vol 68, Issue 1
Abstract
The article is devoted to bearing analysis, which has a specific shape. The outer ring is the body directly and the inner ring is the case. To determine optimal radial clearance or overlap are used the thermal / structural analysis. The article is logically divided into two parts. In the first analysis, was monitored the impact of the press-fit of the case into the body. In the second analysis, there are presented attained results in graphical outputs of displacements in the orbits at different operating temperatures. At the end of the article were evaluated and researched individual effects on bearing deformation.
Authors and Affiliations
Peter Šlesar and Roland Jančo
Keywords
Related Articles
- EP ID EP43933
- DOI https://doi.org/10.2478/scjme-2018-0011
- Views 194
- Downloads 0
Detection and Modeling Vibrational Behavior of a Gas Turbine Based on Dynamic Neural Networks Approach
During the gas turbine exploitation the presence of small defects can cause very high vibration amplifications, localized on the components of this rotating machine. For this, a diagnostic process is necessary for deci...
Frequency Response Function Measurement on Simplified Disc Brake Model
The paper describes role of non-proportional damping in flutter type instability, demonstrated on simplified disc brake model. The discrete two degrees of freedom system is considered to imply damping induced instabili...
Numerical Calculation of Overhead Power Lines Dynamics
This paper contains results of transient analysis of airflow around the ACSR power line cross-section in unsymmetric multi-span. The forces applied to the power line are obtained from CFD simulations, where the wind in...
Natural Fibers and Biopolymers Characterization: A Future Potential Composite Material
Now days, green composite materials are now gaining popularity for the various industrial applications. It is a combination of naturally occurring reinforcement like jute, sisal, flax, hemp, and kenaf; and matrix mater...
Identification of Fatigue Constants by Means of 3D Method
The conventional method for evaluation of the fatigue constants uses one set of experimental data from strain-controlled uniaxial fatigue tests. However, these constants do not ensure the compatibility conditions. The...