Procedure for modeling dynamic processes of the electromechanical shock absorber in a subway car
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 5, Issue 5
Abstract
<p>A procedure has been devised for modeling the dynamic processes in the proposed structure of an electromechanical shock absorber. Such shock absorbers can recuperate a part of the energy of oscillations into electrical energy allowing the subsequent possibility to use it by rolling stock. The procedure is based on solving the Lagrange equation for the electromechanical system. The model's features are as follows. The model takes the form of a Cauchy problem, thereby making it possible to use it when simulating the processes of shock absorber operation. Two generalized coordinates have been selected (the charge and displacement of the armature). The components of the Lagrange equation have been identified. Based on the results from magnetic field calculation and subsequent regression analysis, we have derived polynomial dependences of flux linkage derivatives for the current and linear displacement of an armature, which make it possible to identify a generalized mathematical model of the electromechanical shock absorber. The magnetic field calculations, performed by using a finite-element method, have allowed us to derive a digital model of the magnetic field of an electromechanical shock absorber. To obtain its continuous model, a regression analysis of discrete field models has been conducted. When choosing a structure for the approximating model, a possibility to analytically differentiate partial derivatives for all coordinates has been retained. Based on the results from modeling free oscillations, it was established that the maximum module value of current is 0.234 A, voltage – 52.9 V. The process of full damping of oscillations takes about 3 seconds over 4 cycles. Compared to the basic design, the amplitude of armature oscillations and its velocity dropped from 13 to 85 % over the first three cycles, indicating a greater efficiency of electromechanical shock absorber operation in comparison with a hydraulic one. The recuperated energy amounted to 3.3 J, and the scattered energy – 11.5 J.</p>
Authors and Affiliations
Borys Liubarskyi, Natalia Lukashova, Oleksandr Petrenko, Bagish Yeritsyan, Yuliia Kovalchuk, Liliia Overianova
Keywords
Related Articles
- EP ID EP667138
- DOI 10.15587/1729-4061.2019.181117
- Views 53
- Downloads 0
Effect of mechanoactivated chemical additives on the process of gas hydrate formation
<p>This study addresses the production of gas hydrate of methane with a high gas-hydrate-forming content in a solid phase in the isolated system at T=274 K and pressure of 5 MPa and presence of mechanically activated roc...
Analysis of interaction between a configurable stone and a water flow
<p class="a">Erosion and destruction of riverbeds, foundations of flooded engineering structures are accelerated during natural phenomena, accompanied by a significant increase in the rate and wetted perimeter of river f...
Development of a mathematical model for cost distribution of maintenance and repair of electrical equipment
The research is devoted to the development of a model for cost distribution of maintenance and repair of electrical equipment when making decisions on the management of the electric power system state. The decrease in th...
Influence of ultrasound and template on the properties of nickel hydroxide as an active substance of supercapacitors
<p>Nickel hydroxide is widely used as an active material<span style="text-decoration: line-through;">s</span> of supercapacitors. The most active are Ni(OH)<sub>2</sub> (α+β) samples with layered structure synthesized in...
A multicriterial analysis of the efficiency of conservative information security systems
<p class="AnotEEJ">The paper addresses the task on a multicriterial analysis of the effectiveness of conservative information security systems whose structure and components do not change over a certain period of time. T...