PROPERTIES OF A TRIBOLOGICAL SYSTEM WITH A DIAMOND-LIKE CARBON COATING LUBRICATED WITH ENVIRONMENTALLY FRIENDLY CUTTING FLUID
Journal Title: Tribologia - Year 2018, Vol 281, Issue 5
Abstract
This article presents experimental results obtained for an a-C:H:Si coating deposited on a 100Cr6 steel disc in sliding contact with a 100Cr6 steel ball in the presence of zinc aspartate-based cutting fluid. The study involved scanning electron microscopic examinations, contact angle measurements, tribological tests, and surface texture analysis. The experimental data suggest that the tribological properties of the diamond-like carbon (DLC) coating are satisfactory and that the non-toxic cutting fluid is well-suited to replace conventional fuels, which are toxic.<br/><br/>
Authors and Affiliations
Joanna KOWALCZYK, Krystian MILEWSKI, Monika MADEJ, Dariusz OZIMINA
Keywords
Related Articles
- EP ID EP417490
- DOI 10.5604/01.3001.0012.7642
- Views 35
- Downloads 0
RELATION BETWEEN SHEAR STRESS AND SHEARING TIME IN SELECTED LUBRICANT COMPOSITIONS
The paper presents the results of studies of the influence of fillers introduced into lubricating greases on changes in values of shear stresses in resulting lubricant compositions. These fillers were powders of graphite...
THE INFLUENCE OF THICKNESS OF TiN AND CrN COATINGS ON ROLLING CONTACT FATIGUE
In this paper, the results of the influence the thickness of TiN and CrN coatings on rolling contact fatigue have been presented. The 100Cr6 bearing steel and TiN and CrN coatings deposited on 100Cr6 substrate with diffe...
DISCUSSION ABOUT FUNDAMENTAL PROBLEMS OF TRIBOLOGY. PART 12 – SYSTEMATIC OF RESEARCH ACTIVITY IN TRIBOLOGY – FROM STRATEGY TO TACTIC TRIBOLOGY RESEARCH
This paper presents an attempt at systematising the issues of tribology research according to the criterion of general cognitive tasks. The existing structure covering strategy, operational art and tactics were used for...
INNOWACYJNA TECHNOLOGIA WYTWARZANIA WARSTW PRZECIWZUŻYCIOWYCH NA NARZĘDZIA DO KUCIA NA ZIMNO
Narzędzia do kucia na zimno poddawane są bardzo dużym obciążeniom ze względu na wysokie naprężenia oraz umocnienie podczas kształtowania. W niniejszym artykule przedstawiono analizę wpływu zmiany powierzchni narzędzi z t...
MECHANICAL AND TRIBOLOGICAL PROPERTIES OF OXIDE LAYERS OBTAINED ON Ti-6Al-7Nb ALLOY
The research presented in the paper was focused on determining the effects of thermal oxidation parameters on the mechanical and tribological properties of oxide layers formed on Ti-6Al-7Nb titanium alloy for biomedical...