Properties of High Temperature Oxidation of Heat-resistant Steel with Aluminium and Copper
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 4
Abstract
The research is focused on a novel aluminum and copper-containing heat-resistant steel. The steel was designed by the material performance simulation software JmatPro, performed high-temperature oxidation tests at 650 °C and 700 °C atmospheric conditions, and analyzed the high-temperature oxidation processes and its mechanisms.The phase transtions and surface morphology of the oxide films were studied using X-ray diffraction (XRD), electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The results showed that the equilibrium phase of the test steel is composed of γ phase and δ phase at 1050 °C and tranforms to tempered martensite and δ-Fe mixed structure after heat treatment. The preferential oxidation of Fe and Cr and the internal oxidation of Al occurred during the high temperature oxidation of the test steel. The oxide films were formed with various shape and weak bonding properties after high-temperature oxidation at 650℃. To the contrary, the oxide films more regular and evenly distributed, and has a certain protective effect after high-temperature oxidation at 700 ℃. The oxide films were divided into two layers, Fe2O3 is main element in the outer layer, the inner layer is mainly consisting the oxide of Cr. However, the addition of Cu element can promote the diffusion of Al and Si elements, which is beneficial to the formation of Al2O3 and SiO2 protective oxide films and excellent in high temperature oxidation resistance.
Authors and Affiliations
Hong LI, Chengzhi ZHAO, Tao YAN, Chao DING, Hexin ZHANG, Fengchun JIANG
Keywords
Related Articles
- EP ID EP674906
- DOI 10.5755/j01.ms.25.4.19559
- Views 55
- Downloads 0
Research on Tensile Behaviour of New Structural Material MoNiCa
This article presents the results of a set of innovative research to analyse a new structural material – steel like austempered ductile cast iron with mechanical properties similar to heat-treated steel, and with technol...
Effect of Er Addition on the High Temperature Strength of Al-Si-Cu-Ni-Mg-Fe Piston Alloys by T5 and T6 Heat Treatment
In this study, the dependence of Er addition (0 – 0.49 wt.%) on the microstructural evolution and related tensile strength at high temperature (HT) were investigated for the eutectic Al-Si piston alloys. The results show...
Electrochemical and Tribological Properties of TiSiCN Coatings in Coolant
TiSiCN coatings were prepared using DC and RF magnetron co-sputtering system. The influence of target powers on phase structures, mechanical properties, tribological and electrochemical properties were studied. The resul...
Numerical Analysis of Roles of Depletion Layer Width in Semiconductor Gas Sensor Using the Gradient-Distributed Oxygen Vacancy Model
The roles of depletion layer width in semiconductor gas sensors are quantitatively discussed based on the model of gradient-distributed oxygen vacancies. Several literatures are employed to provide experimental basis of...
Biodegradation of Wood Treated with Copper Based Preservative by Two Dematiaceous Fungi: Alternaria Tenuissima and Ulocladium Consortiale
As cases of treated wood colonization by fungi still happen, the understanding of fungal survival abilities could contribute in the creation of new efficient preservatives. For that reason, two dematiaceous fungi Alterna...