ПУЦОЛАНІЧНІ ДОБАВКИ ДЛЯ ПОРТЛАНДЦЕМЕНТІВ ТРАНСПОРТНОГО БУДІВНИЦТВА
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2017, Vol 0, Issue 877
Abstract
Production of Portland cement is one of the most energy intensive among building materials, it is accompanied by significant CO2 emissions: 0,7 to 1 ton per 1 ton of cement, depending on manufacturing technology. Therefore, replacement of Portland cement clinker with active mineral additives of natural or synthetic origin is environmentally and economically viable, while not causing significant adverse changes in the properties of cement binders. A comprehensive analysis of the properties and research of the microstructure of Portland cement composition containing 20% of granulated blast furnace slag and 10% of pozzolanic mineral additives (zeolite or perlite) was carried out and their characteristics were compared with traditional Portland cement – CEM I, CEM II/A-S, CEM II/B-S. It was determined that the complex structure modification by additives of hydraulic and pozzolanic activity will improve technical properties of building mixes on the basis of such cements without significantly reducing their strength characteristics. It was established, that the introduction of pozzolanic additives in combination with granulated blast furnance slag leads to a change in the hydration mechanism of binding systemso that the resulting activity of composition increases the and not subject to the law of additivity.
Authors and Affiliations
O. Hunyak
Investigation of indoor air quality and its impact on human activity - case study
This paper presents the partial results of human presence impact on indoor air quality in a monitored office room. Indoor air temperature, relative humidity and carbon dioxide concentration are recorded in the investigat...
Оцінка ефективності акумулювання теплоти твердими теплоакумулюючими елементами електротеплового акумулятора
Conducted calculated and experimental research of thermal processes and storage capacity of solid heat storage materials. Analyzed the change of the thermo physical properties of the selected heat storage materials depen...
Стабілізація гідравлічних режимів у системі теплохолодопостачання на основі енергії холодної води і вентиляційного повітря
The heat – cooling supply system of a building on the base of integrated energy of cold water and air flows with heat - pumping installation is suggested. The features of air movement in the pipeline, which connects the...
Моделювання процесів теплообміну в топках водотрубних котлів дКВР(де)-10/14
Тhe results of a numerical study of heat transfer in water-tube boiler DKVR(DE)-10/14 furnace are provided. The geometric model of the inner cavity of furnaces and burners is constructed with help of boiler and burner GM...
The air channel function in real life – insulation against rising damp in historical buildings
The purpose of the research is to find adequate solution against rising damp in historical buildings. The improvement in this case is the use of ventilated air channels. A special group of historical buildings are church...