PVC Coated Glass Fiber Reinforced Composite Filament Material Production And Investigation Of The Mechanical Properties
Journal Title: American journal of Engineering Research - Year 2018, Vol 7, Issue 7
Abstract
In this work, the glass fiber filament was coated with PVC at the extruder in filament form. The filament material produced was woven with a weaving loom then pressed at 165 °C and 2.5MPa of pressure. In order to determine the distribution morphology of the matrix and reinforcement element in the composite fabric produced microstructure images were taken using Hardway brand optical microscope. As a result of the obtained microstructure studies, it was determined that the interphase surfaces in the composite body are stable. In addition, tensile tests were carried out on samples prepared according to ASTM D3039 standard using Shimadzu Ags-x brand testing machine.Composite filament behavior was investigated with the stress-strain and load-displacement diagrams obtained from the tensile tests.
Authors and Affiliations
Mehmet Kayrici, Ayten Nur Yüksel Yilmaz
Keywords
Related Articles
- EP ID EP397991
- DOI -
- Views 75
- Downloads 0
http://ajer.org/papers/v5(02)/F0502042048.pdf4D Collaborative Non-Local Means Based Diffusion MRI Denoising
Noise is a major issue that reduces the quality of images acquired by diffusion MRI (dMRI). Recently, the non-local means (NLM) algorithm has been proposed and successfully applied in dMRI denoising. However, NLM relies...
Comparative Study of the Effects of Environmental Pollution on Roofing Sheets: A Case Study
Environmental pollution from fossil fuel production is still a major problem in the Niger Delta area of Nigeria and the effects have not yet been fully ascertained. It implies therefore, that the solutions needed to curb...
Hamilton Mechanical Equations with Four Almost Complex Structures on Riemannian Geometry
The study concerns the Hamilton Mechanical Equations with Four Almost Complex Structures on Riemannian geometry. The four complex structures have been derived also important applications of Hamiltonian mechanical systems...
Determination of Power Flow in PQ Bus System By Using Gauss Seidel Method
Power flow analysis is the backbone of power system analysis and design. They are necessary for planning, operation, economic scheduling and exchange of power between utilities. The principal information of power flow an...
Quick Sort with Optimal Worst Case Running Time
Quick sort is more than 50 years old and yet is one of the most practical sorting techniques used in the computing industry. Its average running time matches the best asymptotic running time for a sorting algorithm and w...