Quality evaluation of iron casting en-gjl-200 produced on the disamatic line
Journal Title: Acta Innovations - Year 2018, Vol 0, Issue 29
Abstract
This article discusses the issues concerning the quality of casting surface with a small unit weight manufactured on the Disamatic automatic casting lines in a flaskless mould with a vertical parting line. The research was conducted in manufacturing conditions in one of the casting facilities in the country. The identification of casting defects for a monthly manufacturing cycle was made and agreed that the main causes of scrap casting are defects on the raw surface: lumps of moulding sand which after removal form cavities and draws as well as defects of gas origin such as blowholes. There are also defects of form namely short runs. In the later part of the work, the research results of the properties of moulding sand were presented and casting defects were selected the occurrence of which is connected with the quality of moulding sands.
Authors and Affiliations
Kinga Boroń
Keywords
Related Articles
- EP ID EP532397
- DOI 10.32933/ActaInnovations.29.4
- Views 105
- Downloads 0
Change of the communication service model on the example of the housing from the 2nd half of the 20th century "Pod Dalnią" in Kielce
For years, the motorized and uncontrolled degradation of the public space of housing estates from the second half of the twentieth century in Poland has been appropriated. This has a negative impact on their functioning...
Energy analysis of municipal waste in Dubrovnik
In each touristic city waste management system has to overcome the impact of visitors. Dubrovnik, famous as popular touristic destination, particularly notices tourists visiting city. Therefore potential impact of waste...
An innovative method of activating lime waste. Waste – sorbent – product
The paper presents the production technology of sorbents for flue gas desulphurization with the wet limestone method, produced on the basis of limestone waste. The waste was subjected to comprehensive physicochemical tes...
A novel microbial fuel cell with exchangable membrane – application of additive manufacturing technology for device fabrication
Research about exploitation the potential of waste and sludge increased drastically in the recent years. One of the most promising alternative methods of waste management is Microbial Fuel Cell (MFC), which generate clea...
Tests and theoretical analysis of a pvt hybrid collector operating under various insolation conditions
The main goal of the study was to investigate the relationship between the orientation of the PVT (PhotoVoltaic Thermal) collector and the thermal and electric power generated. Extensive research was performed to find op...