Radiometric quality evaluation of dielectric materials
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2013, Vol 0, Issue 52
Abstract
Introduction. The problem statement. It is neseccary to investigate the chemical composition, density and integrity of the product designing products of special purpose. The control of these characteristics without the intervention of the materialcan is carried out using electromagnetic radiation (EMR). EMR can pass through the dielectric materials and also can be radiated by materials with their heating. The experiments on radiation and absorption EMR capacity of dielectric materials were conducted by authors. Studies. The absorbance method is effective method for the study of dielectric material on the density and integrity. The lower density of the material and the more it damages (cracks, splits), so much worse delay EMR in material. EMR pass through all the solid material, without damage, according to a minority. The radiated ability method determines the chemical composition of the material. The level of radiation is measured using the measurement setup and heating the material. It is found from the results that ceramics pottery better radiates and worse delays EMR, and zinc ceramics, however, worse radiates and better delays EMR.
Authors and Affiliations
A. Yanenko, S. Mikhailenko, V. Kutsenko
Keywords
Related Articles
- EP ID EP309028
- DOI 10.20535/RADAP.2013.52.59-64
- Views 77
- Downloads 0
Truncated estimating parameters of additive mixture of radio signal and kurtosis non-Gaussian noise
Introduction. Classical methods based on the use of Gaussian random signal model has its advantages and disadvantages. Therefore, Maximum Likelihood Method have not found wide implementation due to the high computational...
Development of control system of robotic platform with ultrasonic radar HC-SR04
Analytical review of known methods of using the ultrasonic radars to detect and round the obstacles is proposed. There are researches of precision distance measurement to the object. It is shown that for distances uncert...
Scattering of the flat waves by symmetrical vibrator with nonlinear load in process work of nonlinear radio locator
Analysis permitting to find the secondary electrical field distribution along the nonlinear load symmetrical vibrator for anyone component and her harmonics when known level of the power and the irradiation UHF field vol...
Sensitivity analysis of the phase angle of the reflection coefficient of waveguide measurement cell in the case of low loss dielectric
In problem for rectangular waveguide segment with dielectric layer parameters measurement we must analyze sensitivity these parameters to changes some influencing values, like segment length, wavelength and specimen diel...
Enhanced C-band Coaxial Orthomode Transducer
Introduction. In this paper a novel configuration of wideband coherent coaxial OMT is presented. General Design of an Orthomode Transducer. The OMT consists of elements of 3 main types: a turnstile junction between coaxi...