Rationalization of Exhaust System Mounting Brackets for Buses and Trucks
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
Computer-aided engineering (CAE) in Product Design Cycle CAE tools are very widely used in the automotive industry. Their use has enabled the automakers to reduce product development cost and time while improving the safety, comfort, and durability of the vehicles they produce. The predictive capability of CAE tools has progressed to the point, where much of the design verification is now done using computer simulations rather than too much dependency on physical prototype testing.
Authors and Affiliations
Karthick M, Belgin Paul. D. L
Keywords
Related Articles
- EP ID EP671648
- DOI 10.24247/ijmperdoct201921
- Views 82
- Downloads 0
Efficiency Evaluation and Comparison of Different Turbulator Shapes in Solar Water Heating Collector System
Solar flat plate collector is mostly used for the heating purposes like heating of water or any fluid and also used for heating the space or drying purpose. The solar flat plate collector is one of the best methods for t...
The Experimental Study on the Machining Conditions of Heat Treated Medium Carbon Steel using Ceramic Cutting Tool
The current study shows the effect of various heat treatments on the cutting force and surface finishing of machining for medium carbon steel (0.522C) with different cutting conditions have been investigated. In this res...
A REVIEW ON DIESEL INJECTORS MODELING, SPRAY AND CAVITATION
This abstract is a literature review makes use of computational fluid dynamics (CFD) codes to model the incylinder fluid flow on a common rail direct injection diesel engine, turbulence and spray characteristics using fu...
Optimization of Design Parameters of Bellows Expansion Joints
A technique for optimizing the design parameters of the metal corrugated shell of bellows expansion joints is proposed. The purpose of the development is to improve the accuracy of resource assignment, as well as further...
THICKNESS EFFECT OF DCB SPECIMEN ON INTERLAMINAR FRACTURE TOUGHNESS IN CARBON/EPOXY COMPOSITES
In this work, the influence of specimen thickness on interlaminar fracture toughness in delamination of unidirectional carbon/epoxy laminates is presented. Specimens of three different thicknesses: 3.99, 5.27 and 6.65 mm...