Recent Advances in Metal Matrix Composites (MMCs): A Review
Journal Title: Biomedical Journal of Scientific & Technical Research (BJSTR) - Year 2017, Vol 1, Issue 2
Abstract
Metal matrix composites (MMCs) possess excellent physical and mechanical properties. The filler reinforcement into the metallic matrix improves the stiffness, specific strength, wear, creep and fatigue properties compared to the conventional engineering materials. The present work is a study of the effect of reinforcement of different types of fillers in metal matrix and their merits and demerits. Effect of different dispersion on the mechanical properties like tensile strength, strain, hardness, wear and fatigue of MMCs and its different applications are also highlighted in the paper. MMCs (Metal matrix composites) uses metal matrix dispersed with other metal, ceramic or organic compounds. Reinforcements are usually done to improve the various properties of the base metal. The particle distribution plays a very important role in the properties of MMCs. Copper, Magnesium and Aluminium has attracted most attention as base metal in metal matrix composites [1]. These MMCs are widely used in aircraft, aerospace, automobiles, defence and various other fields [2]. The most commonly used reinforcements are Silicon Carbide (SiC), TiO2, Aluminium Oxide (Al2O3), B4C, Y2O3, Si3N4, AlN [3-7]. Al2O3 reinforcement shows good compressive strength and wear resistance. Boron Carbide is one of hardest known elements. It has high fracture toughness and elastic modulus. The addition of Boron Carbide (B4C) in MMCs increases their hardness, but does not improve the wear resistance significantly [4]. Fibers play very important role as reinforcement, as they transfer strength to the matrix which results in the enhancement of their physical and mechanical properties as desired. Zircon is usually used in hybrid reinforcement for improving the wear resistance [5]. In the last decade, lot of work has been done on fly ash reinforced MMCs. Due to their low cost and availability as waste by-product in thermal power plants. It improves the electromagnetic shielding effect of the MMCs [6-8]. Based on the stated potential benefits of MMCs this paper investigates the affect of various dispersion on the mechanical properties of MMCs, processing methodology and their applications. MMCs using several metallic materials as matrix have been studied by many researchers. Among all, the most interesting metals for industrial applications are Al, Mg, Ti, Cu and their alloys [8- 15]. Pure and alloyed aluminium is the most investigated material as matrix in MMCs. Al-based composites are good candidates for structural application. Various nano-sized oxides like (Al2O3, Y2O3) [8-15], nitrides (Si3N4, AlN) [12-14], carbides (TiC,SiC) [13-16], hydrates (TiH2) [7-9] and borides (TiB2) [8-13] have been used as dispersion. As ceramic reinforcements Carborundum, Sic and alumina are widely used in these MMCs. Moreover, different allotropes of carbon like carbon black, fullerenes and carbon nano tubes [15-20] have also been investigated by several researchers. CNTs are potential candidates as they confer very high mechanical properties to the metal matrix. They also increase the electrical conductivity, which makes MMCs very attractive materials for electrical applications. Single wall carbon nano tubes (SWCNT) and multi wall carbon nano tubes (MWCNT) both are used as reinforcement in MMCs. Copper-0.1 wt.% MWCNT composites revealed a 47% increase in hardness and bronze-0.1 wt.% SWCNT showed a 20% improved electrical conductivity [18,19]. Intermetallic compounds like (NiAl, Al3Ti) have also been dispersed in MMCs [15-19]. Al–Al3Ti nano composite showed good mechanical properties at high temperature [17-20], while TiAl–NiAl MMCs revealed high hardness but poor fracture toughness [12,17]. Preparation Methods and Properties Preparation of MMnCs by conventional casting processes results in an inhomogeneous distribution of particles within the matrix due to low wettability of ceramic nano-particles. For the large-scale production of metal matrix nano composites, the main problem to face is the low wettability of ceramic nano-particles, which does not allow the preparation of MMCs by conventional casting processes since the result would be an inhomogeneous distribution of particles within the matrix. The high surface energy results in the agglomeration of nano particles, which are not effective in hindering the movement of dislocations and can hardy generate a physical-chemical bond to the matrix, thus reducing significantly the strengthening capability of nano particles [12-14]. Several unconventional preparation methods have been adopted by researchers to overcome the wettability issue, either by formation of the reinforcement by in situ reaction or by ex situ addition of the ceramic reinforcement by specific techniques. Applications Metal matrix composites reinforced with nano particles or nano tubes are not yet being employed in relevant commercial applications due to their very recent development. However, nano particle dispersed MMCs show higher mechanical properties than micro-particles reinforced composites. No evidence of decrease in thermal and electrical conductivity [5,6]. Therefore, they are potential candidates for substituting conventional MMCs or related monolithic alloys in structural and electrical RT and HT applications. For example, CNT composites could replace carbon fibers composite in many applications, due to their higher strength and stiffness, especially in high-temperature environments. Traditional microreinforced MMCs have poor fracture toughness and ductility then nano-reinforced MMCs. Toughness can be substantially maintained in nano-reinforced composites owing to the reduced particle volume fraction required to achieve strengthening. The enhanced wear resistance [9-12] and the good thermal conductivity combined to the high specific strength make MMCs attractive materials for aircraft brakes. In addition, the specific strength and elastic modulus property is of good use in sport industry, like for rackets, bicycle frames and other components. A further field of potential application is in electronic devices, for example for heat sinks and solders (thanks to their thermal properties) or as antennas (thanks to their electrical properties and stiffness). Aerospace and automotive industries may exploit all the above properties for different kind of applications such as structural radiators, gears, aircraft fins, cylinder liners, disk brakes and calipers. The improved damping capacity of MMCs could also be exploited to reduce vibrations and noise of structures. In Mg– Al2O3 samples extruded at 350 °C after powder milling, a significant damping ability was achieved and attributed to interface character of MMCs [7-13]. Indeed, CNT/2024 Al composites showed improved damping properties at high temperature as high as 400 °C [16-19].
Authors and Affiliations
Anshuman Srivastava
Keywords
Related Articles
- EP ID EP569370
- DOI 10.26717/BJSTR.2017.01.000236
- Views 154
- Downloads 0
Difficult Extraction of Post-Endodontic ally Treated Upper Second Molar : A Case Report
The ideal tooth extraction is “the painless removal of the whole tooths, or roots, with minimal trauma to the investing tissues, so that the wound heals uneventfully & no post-operative prosthetic problem is created. The...
A Rare Case of Thecoma In a Dog
Thecoma is an ovarian tumour which has rarely been described in dog and must be differentiated from other similar neoplasm such as granulosa cell tumour, clear cell carcinoma, luteoma, fibroma, above all by histopatholog...
Phytomedicine and Allied Compounds in Both Human and Animal Healthcare
Worldwide plants have been used for curative purposes from time immemorial. It is estimated by WHO that 80% of the population majority of this in developing countries, still rely on plant-based medicine for primary healt...
Total Knee Arthroplasty using Computer Assisted Surgery in Paget ’s disease of Knee-A case report
The purpose of this case report is to highlight the advantages of computer assisted navigation surgery (CAS) to improve the accuracy in performing Total Knee Arthroplasty (TKA) in a patient affected by Paget’s disease of...
Improving the Quality of Training and Service in Obstetrics and gynecology Practice in Developing Countries -Sudan as a sample
Improvements at Community Level Starts at the “Patient” or Family Level, that is by: a) Improving the awareness of different health issues.; b) Should also include training and support of the Midwives [MW] and the commun...