Reducing Traffic Congestion in Modern Cities: A Challenge Based on Physico-Mathematical Theories and Wireless Sensor Network
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
During the last decade, the ever increasing number of vehicles has worsened the traffic congestion which has become a hot topic in large urban areas. The solution to reduce this congestion in modern cities is based on the optimization of light signals through communication between the wireless sensor placed on each lane and the traffic light controller. It leads to phase duration changes implied by traffic demand. To be more exhaustive, the traffic control at crossroads aims at therefore determining the sequences of vehicles crossing i.e. the distribution sequences to enjoy the right of crossing (green traffic light). This new strategy of traffic control has plentyof potentialities to exploit the abilities of the intersection. Through this article, we will take into account the parameters to diminish the effects of the congestion traffic, as we get on a physico-mathematical model so as to increase the flow of road traffic and avoid road traffic and congestion.
Authors and Affiliations
M. KABRANE, S. KRIT, L. ELMAIMOUNI
Keywords
Related Articles
- EP ID EP279961
- DOI 10.24247/ijmperdfeb201855
- Views 104
- Downloads 0
COMPARATIVE SPECTRUM ANALYSIS FOR VIBRATION IN A ROTATING MACHINE WITH MULTIPLE VARYING CONDITIONSFOR UNBALANCE FAULT AND CHECK FOR FREQUENCY PEAK DOMINANCE
In the current research paper a comparative analysis has been done based on FFT and cross power spectrum analysis for effective diagnosis of vibration in a rotating shaft with different unbalance conditions. The shaft ha...
Experimental Investigation on Properties of Surface Radiation of Solar Collector Receiver Tube Material with Black Nickel Coating
In this study, the characteristics of surface radiation heat transfer properties of stainless steel 304with Black Nickel coating is investigated with and without exposure of sunlight to measure the emissivity (€) and abs...
Improving Oxidation Behavior of (Alpha- Beta) (Cu-Zn40) Brass by Aluminum Addition
Brass alloys with a zinc content of 35 % and more have a mixture of the alpha (FCC) and beta (BCC) phases, that causes an increasing in hardness significantly. Further, this alloy can be formed only by hot-working. There...
Optimization of Process Parameters on Thrust Force and Delamination Factor in Drilling of Carbon Fiber Reinforced Composites
The major objective of this work was to investigate a statistical model, based on Taguchi technique and to estimate the quality of drill in CFRP composite material prepared by hand layup technique. The design of experime...
The Optimization of Tool Life by Fillet Radiuson Cold Forging Die Using Finite Element and Low Cycle Fatigue Theory
Tool life prediction is an important thing in the metal forging industry. To prolong die life, proper die design is crucial. The objective of this work is to study the fillet radius effect to tool life on taperd cold for...