Reliability Analysis of A Cantilever Beam with Circular Hole Depending on Stress-Concentration Factor By Using Monte Carlo Simulation Method
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 1
Abstract
Stress-concentration factor (SCF) is known to be the ratio of the maximum experimental stress around the sudden change of the geometric shape to the theoretical nominal or reference stress. Recently, the investigation of SCF under uncertainty has received intensive attention. In this work, it is aimed to realize reliability analysis of a cantilever beam with a circular hole having random design parameters in consideration of deterministic and stochastic yield strength, and to model the common properties of the statistical characteristics of the outputs. As for the original contributions of this work to the literature, due to the modelled statistical characteristics of SCF and nominal stress, it is considered to reduce the computer cost. Moreover, it can be possible to directly realize reliability analysis without the necessity of an intermediate model and high number of simulations, and thus, to conduct this process in a more practical way by reducing the analysis period. Additionally, in the future works, when this stochastic approach followed in this work is applied to other beams with different geometries and exposed to different loadings, a guideline of SCF for reliable design under uncertainty can be obtained.
Authors and Affiliations
Murat MAYDA
Keywords
Related Articles
- EP ID EP489695
- DOI 10.29109/http-gujsc-gazi-edu-tr.344946
- Views 73
- Downloads 0
A GPU accelerated hybrid GA-SVM for large scale datasets: Cu-GA-SVM
In this study, CUDA based speed optimization of a hybrid method consisting of Genetic Algorithm and Support Vector Machines has been performed. In machine learning, it is aimed to achieve high accuracy values from the de...
Design and construction of low cost sensor and GPS based autonomous unmanned ground vehicle
In recent years, unmanned vehicles have been quite popular for the researchers and those vehicles are still being developed by the researchers and engineers. Unmanned vehicle must do all operations without operator and m...
Integrated Circuits Tester Design for Logic Circuit Laboratories
Logic circuit laboratory is one of the important laboratories for Electrical-Electronics Engineering department. The Integrated Circuits (ICs) must work correctly during the experiments. It is difficult and time-consumin...
An Adaptive Noise Cancellation System Based on Linear and Widely Linear Complex Valued Least Mean Square Algorithms for Removing Electrooculography Artifacts from Electroencephalography Signals
In this study, an adaptive noise cancellation (ANC) system based on linear and widely linear (WL) complex valued least mean square (LMS) algorithms is designed for removing electrooculography (EOG) artifacts from electro...
Effects of Pressing and Sintering on Pore Morphology and Microstructural Properties in AA 2014 Alloy
In this study AA 2014 alloy powder was produced powder metallurgy gas atomization method. Experiment samples were produced by being pressed the powders which average sizes were 90,66 μm under 650MPa having optimum pressi...