Structural Analysis And Weight Optimization Of Recumbent Mouth And Calibrating Machine
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2015, Vol 3, Issue 3
Abstract
In this study, basing on the structural analysis, the topology optimization of horizontal mouth opening and calibrating machine used for wheel rim production machine was analyzed and considering the critical values of Von-Mises stresses, the strengths of the main parts of the machine were calculated in order to demonstrate the importance of topology optimization of machine tools. To carry out the applied loads for wheel rim shaping on the designed machine safely by the system, structural strength analysis was performed. Basing on the results obtained from the structural analysis, the material to be used in the machine was checked and relieving process was carried out for the topology optimization under the same operating conditions. Afterwards, the optimum geometrical dimensions of the system was assessed considering the analysis results carrier system and elements of the carrier system of the machine. The comparison of the strength analysis and lighting results indicated that after the applied lighting, the force distributions have not exceed the critical values. After topology optimization process, total weight of the plane carrier system supports was reduced by 24.12%. Considering the material costs and negative effects of the unnecessary loads on the economical life of the machine, the process implemented for this the machine would be useful for similar machines.
Authors and Affiliations
Hüseyin Güçlü YAVUZCAN, Murat ÖNDER, Selçuk KEÇEL, Adnan AKKURT, M. Sadi KORKMAZ
Keywords
Related Articles
- EP ID EP476197
- DOI -
- Views 101
- Downloads 0
An Investigation of The Effects of Mn Amount on Wear Behaviors of 7075Al Alloy Produced by Powder Metallurgy Method
In this study, microstructure, hardness and wear behaviors of 7075 Al alloy with adding different amount of Mn were investigated produced by powder metallurgy method. In the scope of the study, four different amount of M...
Measurement and Mapping of Long-Term and Continuous Electromagnetic Pollution Levels in a Selected Pilot Region
Mobile phones, mobile devices, the number of users in our daily lives and usage times are increasing rapidly. This rapid increase in both telephone conversations, mobile internet use and mobile systems as well as the rap...
Investigation of Earthquake Behavior of Kars Kümbet Mosque
Historical mosques constitute the important samples of cultural heritage. In the present study, Kumbet mosque, which is located in Kars, was examined for its structural behavior under earthquake accelerations. The histor...
Obtaining of Frequency and Voltage Dependent Resistance and Interfacial States Distribution Profiles on Au / (PrBaCoO nanofiber) / n-Si Structures With Different Methods
In this study, the density of interface states (NSS) and series resistance (RS) were examined for both frequency and voltage in PrBaCoO-nanofiber interface layered metal-semiconductor (Au/n-Si) structures. For this purpo...
A Novel Fully Complex Nonlinear Adaptive Finite Impulse Response Filter Algorithm
In this study, a new fully complex nonlinear adaptive finite impulse response (FIR) filter algorithm based on the complex-valued nonlinear least mean kurtosis (CNLMK) is proposed for nonlinear complex-valued signals. The...