Research Concerning the Influence of Heat Treatment on Physical and Mechanical Properties of Aluminium Based Alloys
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy belonging to the class of aluminum alloys deformable and harden by heat treatment. The laboratory level experiments effected on samples of Al-Zn alloy illustrate the variation of properties depending on the variation of heat treatment technological parameters specific to different variants of heat treatment. In view of the chemical composition of the studied alloy and being aware of the fact that the structure and composition of this type of alloys depend on the proportion Zn/Mg, on the copper and magnesium content as well as on the elements sum(Zn+Mg+Cu), we have experimented more variants of heat treatment in order to establish the optimal variant and to classify the studied alloy according to its use characteristics(high, medium or low strength).
Authors and Affiliations
Elisabeta VASILESCU, Marian-Iulian NEACȘU, Ana DONIGA
Keywords
Related Articles
- EP ID EP663525
- DOI -
- Views 54
- Downloads 0
Corrosion Behaviour of Aluminum Alloy 2024 - T3 in Acidic Environments
This research aimed at analysing the acidic corrosion behavior of aluminum alloy 2024-T3 commonly used in the aerospace. We study the variation of corrosion rate with immersion time at different values of H2SO4 concentra...
Effect of an Oxy-Sulphide Inoculant Enhancer on Graphite Parameters in the Mould Inoculated Compacted Graphite Cast Iron
In compacted/vermicular graphite cast iron production, inoculation is applied to limit the formation of carbides, but usually this treatment also promotes nodular graphite with improved nodularity. The main objective of...
Surface Tension of Liquid Copper in Dilute Oxygen Concentrations
The studies of this paper regarding the influence of low oxygen contents on the liquid copper surface tension had as base „sessile drop” method and the determination of the oxygen content using calculation ratio where pa...
Studies and Research on Pipe Networks Water Losses
The issue of water losses in pipe networks (transmission mains, conveyance and distribution pipelines) is one of the major problems encountered in water supply systems management. The losses have reached very high values...
Influence of Rib Length on the Solidification of Cast Parts
The ribs applied to the walls of cast parts are designed for enhancing both stiffness and aesthetics. The presence of ribs modifies the conditions of heat transmission and implicitly the solidification of the alloy in th...