Melting-Casting Plant Using Vibrating of Melts in order to Obtain Composite with Technological Utility
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 1
Abstract
This paper presents the obtaining of composites materials with technological utility through vibration technology. In order to obtain these composites, and plant was designed and manufactured. In order to show the possibilities of these technologies, a number of composite samples were produced.
Authors and Affiliations
Vasile BASLIU, Ionut CONSTANTIN, Gina Genoveva ISTRATE, Ionel PETREA
Keywords
Related Articles
- EP ID EP647154
- DOI -
- Views 50
- Downloads 0
Dimensional Changes in Some Iron-Based Powder Metallurgy Alloys
The purpose of this paper is to present the dimensional changes in some ironbased (P/M) alloys. The specimens produced from atomized iron powder and alloyed powder with different sizes (< 45, 45-63, 63-100, 100-150, >150...
Finite Element Analysis of Equal Channel Angular Pressing of Al-Mg 5083 Alloy
Bulk nanostructured materials represent the application of nanotechnology in the engineering material area. Severe Plastic Deformation (SPD) and in particular Equal Channel Angular Pressing (ECAP) are efficient and low c...
Optimization of Thermomechanical Processing of Some Aluminum Alloys by Dimensional Interpolation Method Using the Matlab
This paper presents results of research on optimization of thermomechanical treatment applied to an alloy of the Al-Zn-Mg-Cu system, used in the aviation industry.Optimizing thermomechanical treatment process is based on...
Morphology of Nickel Matrix Composite Coatings with Nano- Silicon Dispersion Phase
In this paper is presented the morphology of nickel metal layers, nickel matrix composite and particles dispersed phase, obtained by electrodeposition on steel base, using nickel sulphate as electrolyte. Nickel anodes us...
The Monitoring of Chattering in Cold Rolling Mill System With Five Stands for Thin Strip
Each system (stand – driving) and the continuous rolling line to which it belongs have its own functional and energetically parameters. To reduce any faults of the strip surface it is also necessary to check (eventually...