The Monitoring of Chattering in Cold Rolling Mill System With Five Stands for Thin Strip
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
Each system (stand – driving) and the continuous rolling line to which it belongs have its own functional and energetically parameters. To reduce any faults of the strip surface it is also necessary to check (eventually having a control line) the roll surface quality, the work roll eccentricity, and depending on the disposal by compensation, of eccentric lobes. The appearance of the specific faults on the rolled strip-during the experiments carried out is duet o the vibrations covered by the range of 100-300 Hz. This many-sided theme needs mathematical patterns to correlate the factors and the dimensions (strip types, technological flow, driving) which should be able to basically support the monitoring system. Taking into account the aspects regarding the quality of the surfaces, the geometry of strips and the costs, it necessary to do a monitoring.
Authors and Affiliations
Ștefan DRAGOMIR, Georgeta DRAGOMIR, Constantin SPÂNU
Keywords
Related Articles
- EP ID EP661053
- DOI -
- Views 80
- Downloads 0
Mechanical and Tribological Properties of TiCxOy Thin Films
The main purpose of this work consists on the preparation of single layered titanium oxycarbide, TiCxOy, thin films, deposited by d.c. reactive magnetron sputtering. The depositions were carried out from a TiC solid targ...
Structure and Corrosive Firmness of Composition Materials on the Basis of Copper and Molybdenum Got Method Electron-Beam Technology
The article describe the study of corrosive firmness of composition materials on the basis of copper, obtained by EB-PVD method. Corrosive firmness of condensates was explored by gravimetric method. The especially decrea...
Effect of ZnO Nanoparticles on the Anticorrosion Properties of Epoxy Coating
Homogeneous epoxy coating obtained by embedding ZnO nanoparticles (≤50 nm) in the epoxy matrix, was applied on Grade A naval steel substrates by dipcoating method. The morphology and microstructure of the coatings were c...
Characterization of the Red Mud Resulted from the Alumina Bayer Process Production for the Future Use in Geopolymers Synthesis
This paper presents the results of analyses on the chemical, structural and morphological processing of bauxite red mud resulting from alkaline wet Bayer technology. The characterization of the material considered as was...
Influence of Secondary Refining Treatments on the Quality of HighGrade Steel Used in Oil and Gas Industry
Steel is the most important alloy used in oil and gas industry from production and processing to the distribution of refined products. In this research is analyzed the production technology of steel intended for long pip...