Research on Chemical Deposition of Silver with Antibacterial Role in Implantology
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 4
Abstract
The paper presents a synthesis of the laboratory research on the conditions of achieving chemical deposition of silver on oral implants made of Ti base alloy (bioalloy Ti10Zr). There were used several chemical deposition regimes in which were modified deposition parameters (temperature, stirring time) for two types of implants (different screw thread geometry). Study of the influence of deposition conditions was performed through analysis at scanning electron microscope (SEM) with EDX analyzer. The results revealed the presence of silver, microdispersed particles with morphologies and degrees of dispersion dependent on the factors and technological conditions of obtaining the chemical deposition.
Authors and Affiliations
Elisabeta VASILESCU, Vlad Gabriel VASILESCU, Dumitru DIMA
Keywords
Related Articles
- EP ID EP581246
- DOI -
- Views 87
- Downloads 0
Recycling Possibilities of Metallurgical Slag
The target of the current metallurgical industry is to recycle and utilize all their by-products. Slags are the important wastes and by-products of metallurgical industry, which have been treated, recycled and used world...
Studies and Research on the Production of TiO2 and TiN Thin Films by Assisted Physical Vapor Deposition Magnetron Process
The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtain...
Experimental Aspects for CeO2 Nanoparticles Synthesis and Characterization
In recent years, cerium oxide (CeO2, or ceria) became a versatile nanostructured material because of its unique properties derived from the low dimensionality and high surface area. It was also extensively studied due to...
Optimization of Thermomechanical Processing of Some Aluminum Alloys by Dimensional Interpolation Method Using the Matlab
This paper presents results of research on optimization of thermomechanical treatment applied to an alloy of the Al-Zn-Mg-Cu system, used in the aviation industry.Optimizing thermomechanical treatment process is based on...
Influence of the Nanoparticles Size on the Permeation Properties of the Polymeric Membranes
In this study, polyethersulfone (PES) membranes blended with zinc oxide nanoparticles (ZnO) were manufactured by diffusion induced phase inversion in NMethyl-pyrrolidone (NMP) as solvent and deionized water as coagulant,...