Research on the Complex Microalloyed Zinc Melts
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2010, Vol 33, Issue 2
Abstract
Microalloyed zinc melts are used in hot dip galvanized processes in order to improve products quality. Experiments aimed at obtaining zinc coatings with increased resistance to corrosion, which adhere very well to steel support, which are not conducive Fe-Zn reactions, don’t have negative environmental impacts and present uniformly dispersed phase structure in zinc matrix. To achieve these targets were chosen microalloying elements: nickel, tin, bismuth (compared to lead) and aluminium. There were made various degrees of microalloyed zinc to determine the influence of these factors on the characteristics of the melt and obtained layers. The degree of assimilation of elements in melted zinc was determined by spectrophotometer of samples alloy, taken from melt at different time intervals. There was also presented evidence of elements influence on alloy microstructure.
Authors and Affiliations
Tamara RADU, Lucica BALINT, Maria VLAD
Keywords
Related Articles
- EP ID EP634162
- DOI -
- Views 70
- Downloads 0
Evaluation of the Sonic System Efficiency for Raw Water Treatment
Water pollution is defined as the change in the water composition that is harmful to human health, unsuitable for economic use or reactive and that can cause damage to the aquatic flora and fauna. In the appreciation of...
Obtaining and Characterisation of Thermoresistive Pigments
The paper describes the obtaining and chemical and physico-structural characterisation of a green thermoresistive pigment. The pigment is made of ZnO dopped with Sb, Bi, Cr, Co and Fe oxides and it is used at mosaics and...
Influence of Rib Thickness on the Solidification of Cast Parts
The ribs applied to the walls of cast parts are designed for enhancing both stiffness and aesthetics. The presence of ribs modifies the conditions of heat transmission and implicitly the solidification of the alloy in th...
On the Corrosion Resistance of Cu – Mo Composite Materials obtained by PVD Method
The Cu – Mo composite materials have been obtained by electron flow vaporizing followed by vapor –phase condensing. Researches have shown that corrosion resistance in wet environment varies with the content of molybdenum...
Researches on the Viscoplastic Behavior of a CrMo Alloyed Steel
The paper shows the results of the researches concerning the deformation behavior of alloyed steel with chromium and molybdenum. The plastic deformation behavior is researched in the experimental way, using the torsion t...