On the Corrosion Resistance of Cu – Mo Composite Materials obtained by PVD Method
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 1
Abstract
The Cu – Mo composite materials have been obtained by electron flow vaporizing followed by vapor –phase condensing. Researches have shown that corrosion resistance in wet environment varies with the content of molybdenum, working conditions and composition of the corrosion medium. The corrosion resistance of the composites has been studied by gravimetric method.
Authors and Affiliations
V. G. GRECHANYUK, N. I. GRECHANYUK, L. ORAC, V. A. DENISENKO
The Assessing of Mechanical Characteristics of the Steel Sheets Designed for Drawing for a Five-Month-Period as an Effect of Natural Ageing
In the paper it is presented a study run on a five-month-period regarding the changes in the mechanical characteristics due to natural ageing for a drawing steel, cold rolled, unalloyed with 0.04% C. The ageing tendency...
Comparative Characteristics of Martensite and Bainite in Cu-Based SMAs
The present work reports the evolution of micro-structure and shape memory behavior in a Cu-15 Zn-6 Al (mass. %) shape memory alloy (SMA), as a function of the applied hot working procedure and of the performed heat trea...
Estimation of the Metallurgical Industry Impact on the Environment
Objectively, the ecosystem in its development and working implies the accumulations on of some nonconcordances. Summing these disfunctions without taking into consideration their attenuation, may lead to producing, achie...
Researches Regarding Structural Changes due to nickel Microlalloying of Hot Galvanizing Baths
This work offers a synthesis of researches performed in laboratory and regards the nickel microalloying of hot galvanizing baths. Experiments followed the structural changes of both hot galvanizing bath and deposed layer...
Research on Obtaining and Characterization of Polymeric Membranes for Wastewater Treatment
Some of the most common polymeric membranes are used in wastewater treatment. Over the years, these membranes have been studied from different points of view: their aim to improve the retention of impurities, membrane af...