Research on the Performance of a Drafting Device for the Four-Line Compact Spinning System
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 2
Abstract
Compact spinning is one of the most important improvements of traditional ring spinning, which is implemented by adding a fibre condensing device to condense the fibre bundle and decrease the spinning triangle, thereby improving the qualities of yarn. Pneumatic compact spinning is the most widely used compact spinning method at present. Four-line compact spinning is one of the most important kinds of pneumatic compact spinning, which is implemented by using a Lattice apron to achieve fibre condensing, decrease the spinning triangle and improve the yarn qualities, especially reducing yarn hairiness. In this paper, the performances of drafting devices for Four-line compact spinning were studied. First the structure and performance of an SDDA2122PH pneumatic cradle equipped with a new kind of block top roller retaining bar were discussed and the pressure distribution of the cradle presented firstly. Then 7.3 tex T65/JC35 was spun on an EJM128K spinning frame equipped with an SDDA2122PH pneumatic cradle, the pressure distributions measured, and the spun yarn qualities were measured and analysed accordingly. Then the acting mechanism of three kinds of top pin: a common top pin without a press bar, a top pin with a front pressure bar, a top pin with a back pressure bar, with respect to yarn qualities was analysed firstly, and then JC 18.2 tex, JC60/T40 18.4 tex and T 18.4 tex yarns were spun on an EJM128K spinning frame equipped with different top pins. Then the qualities of the spun yarns were analysed according to the acting mechanism of the top pin. The results show that by using the new block top roller retaining bar, the pressure of the pneumatic cradle is larger and more stable, thereby improving the spun yarn’s comprehensive qualities. For cotton yarn, we can reduce yarn hairiness by using a top pin with a pressure bar; for chemical fibre and cotton blended yarn, yarn strength can be improved by using a top pin with a pressure bar, and for chemical fibre pure yarn, the usage of a top pin with a pressure bar is beneficial for improving yarn strength and evenness, but not for yarn hairiness and yarn thin and thick places.
Authors and Affiliations
Xuzhong Su, Xuzhong Su, Weidong Gao, Xinjin Liu, Chunping Xie, Bojun Xu
Matematyczny model przepływu ciepła w tkaninie z umieszczonym w niej czujniku temperatury
Opracowano matematyczny model przepływu ciepła przez tkaninę zawierającą wbudowane czujniki temperatury w celu określenia wpływu poszczególnych czynników na przebieg pomiarów. Brano pod uwagę oporność termiczną styku cz...
Cottonisation of Decorticated Flax Fibres
The commonly used flax process of decortication allows the mechanical extraction of fibre from plant stems without prior retting. The one-type fibre obtained in this process is characterised by very low quality, as it is...
Nowa metoda określania łączenia kolorów dla tkanin wykonanych z przeplatanych przędz barwionych
Pokazano opracowanie nowej metody określania łączenia kolorów, opartej na algorytmach uzyskiwania wartości średnich mających zastosowanie przy wielokolorowych przędzach przeplatanych w tkaninach. Metoda może być stosowan...
Investigation of the Effect of Pile Height and Yarn Linear Density on the Performance Properties of Pile Loop and Cut-Pile Loop Knit Fabrics
This paper investigates the effects of fabric structural parameters such as pile yarn linear density (19.7, 22.7 and 24.6 tex), ground yarn linear density (100 and 78 dtex), sinker height (2.2 sinker; 2.5 sinker and 2.8...
Comparison of the Structure and Properties of Wool and Cashmere Fibres under Potassium Permanganate Treatment
In this study, the weight loss and tensile property of wool fibers and cashmere fibers before and after various potassium permanganate solution treatment were investigated. The scale morphology and crystallization index...