Research Regarding the Wear Level for a New Constructive Solution of a Cutting Tool
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 3
Abstract
The paper presents a study of wear made to implement a constructive solution for a new cutting tool. The design of the cutting tool can be checked from a functional perspective, as well as reliability during the cutting process (process simulation). The purpose of the cutting process simulation is to check the new solution using the finite element analysis method. The criterion to assess the effectiveness of the constructive solution is the study of the tool wear level depending on cutting regime parameters. The implementation of the wear model in the DEFORM software was used to establish the wear level.
Authors and Affiliations
Liliana Georgeta POPESCU
Keywords
Related Articles
- EP ID EP587086
- DOI -
- Views 91
- Downloads 0
Laser Surface Alloying of Some Steels from SiC Predeposited Powders
For the purpose of studying the possibilities of increasing the wear resistance, specimens of three steels with 0.2%C, 0.46%C and 1%C were surface alloyed with reinforcement from overlapping pastes with green SiC hard pa...
Lean - A Philosophy Highlighting the Value Added Through Self Improvement and Waste Reduction, Concepts Presented from the Experience of the Romanian Automotive Industry
The definition of Lean n is: eliminating all sources of error, time and effort that are not necessary starting with the raw materials and up to the final product, from order to delivery and from design to launch. TRW is...
Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 1050 °C
Nitriding at low temperatures, 450-500 oC of austenic stainless steels lead to the obtaining of the tough layers over 1000 HV005 but having thicknesses of tenths of microns. Moreover, nitriding at 500ºC has determined th...
The Influence of Friction Forces in Metal Powders Compaction Process of Stainless Steel 316L
The purpose of this study is to determine as precisely the influence of friction in the compaction of powders, and "conversion" of it, increasing densification. The process is intended to be used in the compaction of har...
Researches Regarding Waste Processing of Cellulosic Materials by Pyrolysis Process
In this paper were performed laboratory experiments regarding processing by pyrolysis process of urban waste components (wood, paper, textiles). The authors designed and developed an experimental equipment and were appli...