Prediction of Buckling and Postbuckling Behaviour of Composite Ship Panels
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
The behavior of ship plating normally depends on a variety of influential factors, namely geometric/material properties, loading characteristics, initial imperfections, boundary conditions and deterioration arising from corrosion and fatigue cracking. The analysis is presented for a uniaxially in-plane loaded, clamped, composite laminated quadratic plate. The imperfection is considered as the initial deformation due to the manufacturing operations: cosinusoidal shape in both of the longitudinal and transverse direction. Usually, the initial deformation mode appears in the form such as the fundamental mode of the buckling or vibration (figure 1) Variation of the maximum transverse displacement regarding the inplane load (displacement controlled after nonlinear buckling analysis) for three cases are presented.
Authors and Affiliations
Ionel CHIRICA, Elena-Felicia BEZNEA, Raluca CHIRICA, Doina BOAZU
Keywords
Related Articles
- EP ID EP661025
- DOI -
- Views 46
- Downloads 0
Research on the Complex Microalloyed Zinc Melts
Microalloyed zinc melts are used in hot dip galvanized processes in order to improve products quality. Experiments aimed at obtaining zinc coatings with increased resistance to corrosion, which adhere very well to steel...
Mechanical and Tribological Properties of TiCxOy Thin Films
The main purpose of this work consists on the preparation of single layered titanium oxycarbide, TiCxOy, thin films, deposited by d.c. reactive magnetron sputtering. The depositions were carried out from a TiC solid targ...
Industrial Research in Thicker Heavy Plates (70-80 mm) HSLA Steel Micro-Alloyed with Mo-NbTi Thermo-Mechanical Control Process in ArcelorMittal Galati
Thermomechanical rolling (TMR or TMCP) is a special rolling process resulting in an extremely high-strength, fine-grained substructure which simultaneously offers very good toughness and cold formability. TM products hav...
The Influence of the Steel's Surface Quality on the Electroless Ni-P Coatings
The method of autocatalytic reduction coating assures a precise reproduction of the coated surface. This is an advantage when the support surface has a complex geometry but also becomes a disadvantage because it requires...
Thermal Decomposition of Hafnium Ethoxide-Mollecular Precursor for Hafnia Dielectric Thin Films
The HfO2 thin-film is a very promising gate dielectric material for last generation transistors. The paper presents the thermal decomposition of hafnium ethoxide used as molecular precursor for obtaining hafnia thin film...