On the Kinetics of Sol Gel Al:ZnO Thin Films Crystallization on Silicon Substrate
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
Recently, there is a growing interest in applying ZnO thin films on silicon buffer substrates for p-n junction devices, optical wave guide, etc. A sol gel process is very attractive technique for obtaining oxide thin films, due to easy control of film composition, easy fabrication of large area thin films with low cost and the ability to coat- specific shapes substrates. This paper presents a kinetic investigation of the crystallization (550-650 oC) of high preferential c-axis oriented ZnO thin films on p-type (100) silicon wafer substrate, from XRD data.
Authors and Affiliations
Viorica MUŞAT, Joao CANEJO, Cătălina ITICESCU
Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200 °C
The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is...
Study Related to Improve Performance of a Neutralizing Gas Dynamics System
Worldwide, the series of attacks "with bomb" are the most common, accounting for over 80% of terrorist attacks. The many constructive solutions of Improvised Explosive Devices (I.E.D), would require for defusing sequence...
Study on the Soil Chemical Pollution in the Area of the Residual Bauxite Lake "Mineri" – Tulcea
The paper presents a study on the impact of chemical pollution of the soil, from residual bauxite lake, from "Mineri", in the areal of Tulcea. Soil samples were taken from the lake, and from the immediate area of the lak...
Solutocapillary Effects of Sulphur in CaO-Al2O3 Slags, in Marangoni Instability and Convection Onset, Related to the Desulphurization of low Carbon, Aluminium Killed Steels
Based on the “one layer model” applied to desulphurization slag layer with boundary conditions, imposed due to the sulphur transfer through the interface steel-slag during desulphurization process, the threshold conditio...
Problems and Solutions Regarding the Centrifugal Casting of Wire Sheave for Heavy Cranes
The centrifugal casting of wire sheave is a technological method that ensures the important quality requirement, the continuity of the material in the active rolling zone of the sheave. However the centrifugal casting ha...