RESEARCH STUDY OF HARDNESS VALUES OBTAINED WITH DYNAMIC HARDNESS TESTER PROTOTYPE DD01
Journal Title: TEHNOMUS - Year 2013, Vol 20, Issue 1
Abstract
The paper submitted for publication is a comparative study of the hardness values recorded on metallic and non-metallic samples, values that been taken over with a standardized hardness tester Shimadzu HMV-2T, respectively Dynamic Hardness Tester Prototype DD01.Dynamic Hardness Tester Prototype DD01 is a device for determining dynamic hardness of metallic and non-metallic materials, device that was built starting from the proposal became patent Durimetru DinamicRO 126704/2011. The analysis of experimental results shows that the average value of dynamic hardness obtained with Dynamic Hardness Tester Prototype DD01 are closely approximates to the value determined by standardized devices, surprisingly good results to an significant costs in terms of series production
Authors and Affiliations
Severin Traian-Lucian, Băncescu Nicolai, Dulucheanu Constantin
Keywords
Related Articles
- EP ID EP93489
- DOI -
- Views 113
- Downloads 0
PROPERTIES OF HARD ALLOYS SINTERED FROM METALLIC CARBIDES
The TiC or TaC alloys, the simple WC-C0 alloys with the same cobalt content are much more resistant to bending and breaking and feature improved electrical and heat conductivity. The oxidation resistance of the simple WC...
ABRASIVE WEAR BEHAVIOR OF 65MN10 STEEL
Fatigue and wear are the main mechanisms determining out operating of machine parts. Abrasive wear involves progressive destruction of the superficial layer of material displacement under the action of particles with hig...
ABOUT NATIONAL STRATEGY OF ROAD SAFETY IN PRESENT AND FUTURE
After the year 1990, the car park and also the number of drivers have almost tripled, being in a complete contradiction with the slow development of the infrastructure, leading to an increase in the percent of material a...
ANALYSIS OF CONDITIONS FOR OBTAINING A KEYHOLE REGIME FOR LASER WELDING
For laser welding using high intensity of laser beam produce the keyhole phenomenon in welding pool. For keyhole welding regime there is a particular of the weld cross-section shape aspect given by the heat affected zone...
CONSIDERATIONS REGARDING THE FUNCTIONALITY OF THE CHUCK COLLETS
In this paper the authors aim to present the theoretical study of functionality of clenching mechanisms such as chuck collets, abbreviated MBE. For these chuck collets to function properly, a value for the angle of th...