PROPERTIES OF HARD ALLOYS SINTERED FROM METALLIC CARBIDES
Journal Title: TEHNOMUS - Year 2011, Vol 18, Issue 1
Abstract
The TiC or TaC alloys, the simple WC-C0 alloys with the same cobalt content are much more resistant to bending and breaking and feature improved electrical and heat conductivity. The oxidation resistance of the simple WC-C0 alloys is considerably lower which results in a pregnant tendency for chip welding and low resistance. Hardness is affected by micro- porosity, granulation of WC phase, purity and composition, extent of homogenization of the liquid and carbons. The magnetic saturation increases with higher Co contents; it is worth mentioning that bigger grain alloys have a force considerably lower than that of fine grain ones.
Authors and Affiliations
Stela Constantinescu
Keywords
Related Articles
- EP ID EP113673
- DOI -
- Views 123
- Downloads 0
MAGNETO-ABRASIVE MATERIALS AND METHODS FOR OBTAINING THEM
Magnetic abrasive particles (MAPs) are crucial to ensure finishing quality and accuracy in magnetic abrasive finishing (MAF) processing. Conventional MAPs consist of ferrous particles and abrasive, such as Al2O3 , SiC,...
MODULAR DESIGN FOR A FAMILY OF MECHANICAL ANTHROPOMORPHIC POLY-MOBILE GRIPPERS WITH 4 FINGERS FOR ROBOTS
In this paper one anthropomorphic modular gripper for robots are described. The stages of synthesis, analysis design and functional simulation are presented. The structural synthesis of the anthropomorphic grippers for r...
MOLTEN METAL PHASE DURATION EFFECT ON THE STRUCTURE AND HARDNESS OF HIGH-CARBON FUSED COATING
The duration of the molten metal phase in the process of crystallization is an important factor determining the structure of the fused high-carbon coating.Theanalysishasshownthatthedurationofthe liquidmetalphase inaweldi...
SOURCES OF POLLUTION IN SIDERURGY AND TECHNIQUES FOR REDUCING NOXIOUS EMISSIONS
The systematic identification of the various sources of pollution creates the necessary background for organizing actions in order to prevent and fight against pollution. The diversity of the sources and forms of polluti...
RESEARCH STUDY OF HARDNESS VALUES OBTAINED WITH DYNAMIC HARDNESS TESTER PROTOTYPE DD01
The paper submitted for publication is a comparative study of the hardness values recorded on metallic and non-metallic samples, values that been taken over with a standardized hardness tester Shimadzu HMV-2T, respective...